Schneider Electric A9F03106, EAN: 3606480439667

Schneider Electric A9F03106 Circuit Breaker 1p B 6A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F03106 Circuit Breaker 1p B 6A

Lieske Part No. 233549
Mfg Part No A9F03106
EAN-Code 3606480439667
Manufacturer Schneider Electric
Here only 17,67 EUR
21,03 EUR incl. VAT

Further information for Schneider Electric A9F03106 Circuit Breaker 1p B 6A

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 60 V AC 50/60 Hz; 100 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 12 - 60 V DC; 60 - 72 V DC
Magnetic trip threshold4 x inch +/-20 %
Breaking capacity36 kA Icu at 12 - 60 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 100 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 12 - 60 V DC complies with EN/IEC 60947-2; 10 kA Icu at 60 - 72 V DC complies with EN/IEC 60947-2; 6000 A Icn at 230 V AC 50/60 Hz complies with EN/IEC 60898-1
Rated switching-off capacity Ics27 kA 75 % x Icu at 12 - 60 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 100 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 100 % x Icu at 12 - 60 V DC conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at 60 - 72 V DC conforming to EN/IEC 60947-2
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Terminal pitch18 mm between devices
9-mm pitch2
Height91 mm
Width18 mm
Depth78,5 mm
Product weight0,125 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsDouble terminal (top or bottom), for 1 cable(s), 1…25 mm², solid, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded with ferrule, copper; Double terminal (top or bottom), for 1.0 cable(s), stranded, copper or aluminium, with ring terminal and accessory
Wire stripping length14 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionNone
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60N
Device applicationDistribution
Pole description1P
Number of protected poles1
[In] Rated current6 A
Type of networkAC; DC
Trigger technologyThermal-magnetic
Cam discB
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height1,800 cm
VPE 1 width7,300 cm
VPE 1 length9,100 cm
Packaging weight (Lbs)113,000 g
VPE 2 typeBB1
VPE 2 quantity12
VPE 2 height8,500 cm
VPE 2 width9,800 cm
VPE 2 length22,000 cm
VPE 2 weight1,416 kg
VPE 3 typeS03
VPE 3 quantity132
VPE 3 height30,000 cm
VPE 3 width30,000 cm
VPE 3 length40,000 cm
VPE 3 weight16,150 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 1-pole switch with a rated current of 6 A, designed for use in distribution systems. It belongs to the Acti9 series and features a thermomagnetic tripping technology that responds to both overload and short-circuit conditions. The B characteristic ensures a balanced response to load surges, with the magnetic tripping threshold set at 4 times the rated current. The device is designed for operating voltages of 220–240 V AC 50/60 Hz and complies with standards EN/IEC 60947-2 and EN/IEC 60898-1, with usage category A according to EN/IEC 60947-2. The rated insulation voltage is 500 V AC, and the rated impulse withstand voltage is 6 kV. The breaking capacity is 10 kA Icu for 220–240 V AC 50/60 Hz and 6000 A Icn at 230 V AC 50/60 Hz, achieving limitation class 3 according to EN/IEC 60898-1.

Applications
The switch is designed for use in electrical distribution systems, particularly in residential and commercial buildings as well as industrial facilities, where safe and reliable circuit protection is required. It is suitable for protecting consumers and circuits with a nominal current up to 6 A. The operating temperature range is from -35 °C to 70 °C, and the storage temperature range is from -40 °C to 85 °C, making it usable even under extreme environmental conditions. The relative humidity can reach up to 95 % at 55 °C. The protection rating IP20 is intended for use in enclosed switchgear, while IP40 is achieved in modular enclosures (insulation class II).

Functions and Equipment in Detail
The switch features double terminals at the top and bottom, suitable for solid copper cable (1–25 mm²) as well as flexible copper conductors (1–16 mm²). For flexible conductors with wire end ferrules, the permissible cross-section is 1–16 mm². A combination with flexible copper or aluminium conductors (1.0 mm²) is also possible when using ring terminals and accessories. The wire stripping length is 14 mm, and the required tightening torque is 2 Nm. The contacts are equipped with a snap-action switching mechanism, ensuring wear-resistant switching. A moving insulation cover provides additional safety during installation and maintenance.

Technology Explained Simply
The thermomagnetic tripping technology combines a thermal and a magnetic tripping element. The thermal part responds to sustained overloads, while the magnetic part protects against sudden short circuits. The B characteristic means that the switch trips after approximately 1 hour at 1.3 times the rated current, after about 10 seconds at 2 times the current, and immediately at 4 times the current. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles. The contact position indicator (VisiSafe) shows green when the outgoing side is de-energized, and the tripping indicator (VisiTrip) mechanically signals tripping due to overload or short circuit.

Compatibility and Accessories
The switch can be mounted on a 35 mm DIN rail and can be installed tool-free via the front-accessible mounting element. The connection pitch is 18 mm, and the device is designed in 9 mm module increments (2 modules). It is compatible with RCD circuit breakers from the Acti 9 iID series as well as with the Vigi iC60 RCD module. Additional auxiliary modules such as current-operated release, under-voltage release, over-voltage release, or auxiliary switches can also be connected. Suitable accessories include filler and spacing pieces, phase bar modules, rotary drives, under-voltage releases, and terminal covers.

Mounting and Installation
Mounting is done on a 35 mm DIN rail, with the device being secured tool-free via the front-operated mounting bracket. The device can be easily removed even with an installed phase bar, as the mounting element is accessible from the front. The terminals are designed for top or bottom connections, allowing flexible installation in enclosures. The device colour corresponds to RAL 9003 (white).

Advantages in Operation
The switch offers high reliability through thermomagnetic tripping technology and snap-action switching. The front-mounted indicators (VisiSafe and VisiTrip) simplify maintenance and diagnostics. Tool-free mounting and easy removal increase efficiency during installation and maintenance. Compatibility with additional modules extends the functionality of the switch in complex distribution systems. Compliance with standards EN/IEC 60947-2 and EN/IEC 60898-1, as well as VDE certification, guarantees the safety and quality of the product.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/233549
qrcode für Schneider Electric A9F03106 Circuit Breaker 1p B 6A