Complementary
[Ie] rated operational current	20 A
Control type	Toggle 2 positions
Marking	0 - 1
Mounting mode	Clip-on
Mounting support	DIN rail
9 mm pitches	4
Height	82 mm
Width	36 mm
Depth	75 mm
Colour	White
Electrical durability	AC-22: 30000 cycles cos Phi = 0.8
Connections - terminals	Staggered tunnel terminal (downside) 2 cable(s) 0.5…2.5 mm² flexible; Staggered tunnel terminal (downside) 2 cable(s) 0.5…2.5 mm² rigid without cable end
Wire stripping length	9 mm
Tightening torque	1 N.m
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20 conforming to IEC 60529
Tropicalisation	2
Pollution degree	3
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-20…50 °C
Ambient air temperature for storage	-40…70 °C
Logistical informations
Country of origin	BE
Main
range of product	Acti9
Product name	Acti9 iSSW
Product or component type	Changeover switch
Device short name	iSSW
Device application	Electrical circuit control
Poles description	2P
Contacts type and composition	2 C/O
[Ue] rated operational voltage	250 V AC 50/60 Hz
Standards	IEC 60669-1; IEC 60947-5-1
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	3.600 cm
Package 1 Width	7.500 cm
Package 1 Length	9.000 cm
Package 1 Weight	86.700 g
Unit Type of Package 2	BB1
Number of Units in Package 2	6
Package 2 Height	8.000 cm
Package 2 Width	9.800 cm
Package 2 Length	23.400 cm
Package 2 Weight	575.000 g
Unit Type of Package 3	S03
Number of Units in Package 3	54
Package 3 Height	30.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	5.678 kg

Circuit breaker Acti 9 C120N, 10kA (IEC/EN 60898-1), 10kA (IEC/EN 60947-2). 2-pole, nominal current 125A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Protecting circuits against short-circuit currents and overload currents. Terminals IP20. Fully open contacts are indicated by the OFF marking on the switch knob, so that work on the downstream system part can be carried out with due safety. Power supply from above and below. Snap action for low-wear switching of the contacts. Technology of the trip unit - thermomagnetic. Can be combined with the FI Block Vigi for C120. Additional auxiliary modules (optional) that can be connected in series - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The C120N circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified.