Schneider Electric A9D87420, EAN: 3606481157560

Schneider Electric A9D87420 FI/LS switch iC60N 4P

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9D87420 FI/LS switch iC60N 4P

Lieske Part No. 328692
Mfg Part No A9D87420
EAN-Code 3606481157560
Manufacturer Schneider Electric
Here only 391,40 EUR
465,77 EUR incl. VAT

Further information for Schneider Electric A9D87420 FI/LS switch iC60N 4P

Additional features
Device position in systemOutlet
[Ue] Operational rated voltage380 - 415 V AC 50 Hz
Threshold for magnetic actuation3 - 5 x In
Earth fault trip technologyVoltage-independent
Earth fault protection time delayInstantaneous
Earth fault protection classType A
Breaking capacity6000 A Icn at 380 - 415 V AC 50 Hz conforms to EN/IEC 61009-2-1; 6 kA Icu at 380 - 415 V AC 50 Hz conforms to EN/IEC 60947-2
Rated switching-off capacity Ics6000 A 100 % x Ics at 380 - 415 V AC 50 Hz conforming to EN/IEC 61009-2-1; 6 kA 100 % x Icu at 380 - 415 V AC 50 Hz conforming to EN/IEC 60947-2
Rated breaking force and rated powerIdm 6000 A at 380 - 415 V AC 50 Hz corresponds to EN/IEC 61009-2-1
Limiting class1 corresponds to EN/IEC 61009-2-1
[Ui] Rated insulation voltage500 V AC 50 Hz
[Uimp] Rated impulse voltage withstand4 kV
Inrush current250 A
Control typeToggle switch
Local signallingON, OFF, fault indication
Mounting modePlug-in
Mounting bracketDIN rail
Compatibility of comb rails and distribution blocksTop or bottom: yes; bottom: dual-function terminal
Terminal pitch9 mm between poles
9-mm pitch8
Height86 mm
Width72 mm
Depth78 mm
Product weight423 g
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsTunnel terminals top or bottom 1…35 mm² solid; tunnel terminals top or bottom 1…25 mm² fine-stranded; tunnel terminals top or bottom 1…25 mm² fine-stranded with ferrule
Wire stripping length12 mm for top or bottom connection
[M] tightening torque2 Nm
Earth fault protectionIntegrated
Contact position indicatorNo
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60 RCBO
Product or component typeResidual current circuit breaker with overcurrent protection (FI/LS)
Device short nameiC60 FI/LS
Device applicationDistribution
Pole description4P
Number of protected poles4
[In] Rated current20 A
Type of networkAC
Network frequency50 Hz
Trigger technologyThermal-magnetic
Cam discB
Earth fault sensitivity30 mA
Suitability for insulationNo, complies with IEC 60947-1
Conformity markingNF; VDE; IMQ; KEMA-KEUR
Mounting
StandardsEN/IEC 60947-2; EN/IEC 61009-2-1
Degree of protection (IP)IP40 (distribution cabinet) corresponds to IEC 60529; IP20 corresponds to IEC 60529
Over voltage categoryIII corresponds to IEC 60364
Electromagnetic compatibility8/20 µs impulse resistance, 250 A corresponds to EN/IEC 61009-2-1
Drip-proof2
Relative humidity95 % at 55 °C
Operating ambient temperature-25…60 °C
Ambient temperature during storage-40…70 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height8,800 cm
VPE 1 width8,000 cm
VPE 1 length10,300 cm
Packaging weight (Lbs)438,000 g
VPE 2 typeBB1
VPE 2 quantity3
VPE 2 height10,000 cm
VPE 2 width11,200 cm
VPE 2 length25,000 cm
VPE 2 weight1,388 kg
VPE 3 typeS03
VPE 3 quantity18
VPE 3 height30,000 cm
VPE 3 width30,000 cm
VPE 3 length40,000 cm
VPE 3 weight8,974 kg
Residual current circuit breaker with overcurrent protection (FI/LS) Acti 9 iC60N, 6kA (IEC/EN 61009-1 and IEC/EN 61009-2-1), 6kA (IEC/EN 60947-2). 4-pole, nominal current 20A, B characteristic, earth fault sensitivity 30mA, earth fault protection class type A, operating voltage (Ue) 230V AC, insulation voltage (Ui) 500V AC. Guarantees comprehensive protection of final circuits against overcurrents and fault currents. Switching and disconnecting of circuits. Snap action for low-wear switching of the contacts. Mechanically separated red display when the circuit breaker is tripped or when it is tripped by a fault current. Clear switch position display by green marking on the device's switch knob. Test button for regular function testing. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added (optional) - auxiliary switch for status reporting (iOF), error reporting switch (iSD), OF/SD switch with Ti24 interface for status reporting to a programmable logic controller (iOF/SD24). Tool-free installation on the left side of the device. Color RAL 9003. The FI/LS IC60N meets the following standards - IEC/EN 61009-1, IEC/EN 61009-2-1 and IEC/EN 60947-2. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/328692
qrcode für Schneider Electric A9D87420 FI/LS switch iC60N 4P