Additional features
Device position in system	Outlet
[Ue] Operational rated voltage	380 - 415 V AC 50 Hz
Threshold for magnetic actuation	5 - 10 x In
Earth fault trip technology	Voltage-independent
Earth fault protection time delay	Instantaneous
Earth fault protection class	Type A-SI (Superimmunized)
Breaking capacity	6000 A Icn at 380 - 415 V AC 50 Hz conforms to EN/IEC 61009-2-1; 6 kA Icu at 380 - 415 V AC 50 Hz conforms to EN/IEC 60947-2
Rated switching-off capacity Ics	6000 A 100 % x Ics at 380 - 415 V AC 50 Hz conforming to EN/IEC 61009-2-1; 6 kA 100 % x Icu at 380 - 415 V AC 50 Hz conforming to EN/IEC 60947-2
Rated breaking force and rated power	Idm 6000 A at 380 - 415 V AC 50 Hz corresponds to EN/IEC 61009-2-1
Limiting class	1 corresponds to EN/IEC 61009-2-1
[Ui] Rated insulation voltage	500 V AC 50 Hz
[Uimp] Rated impulse voltage withstand	4 kV
Inrush current	3000 A
Control type	Toggle switch
Local signalling	ON, OFF, fault indication
Mounting mode	Plug-in
Mounting bracket	DIN rail
Compatibility of comb rails and distribution blocks	Top or bottom: yes; bottom: dual-function terminal
Terminal pitch	9 mm between poles
9-mm pitch	8
Height	86 mm
Width	72 mm
Depth	78 mm
Product weight	423 g
Colour	White
Mechanical life	20000 cycles
Electrical lifetime	10000 cycles
Connections - terminals	Tunnel terminals top or bottom 1…35 mm² solid; tunnel terminals top or bottom 1…25 mm² fine-stranded; tunnel terminals top or bottom 1…25 mm² fine-stranded with ferrule
Wire stripping length	12 mm for top or bottom connection
[M] tightening torque	2 Nm
Earth fault protection	Integrated
Contact position indicator
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 iC60 RCBO
Product or component type	Residual current circuit breaker with overcurrent protection (FI/LS)
Device short name	iC60 FI/LS
Device application	Distribution
Pole description	4P
Number of protected poles	4
[In] Rated current	32 A
Type of network	AC
Network frequency	50 Hz
Trigger technology	Thermal-magnetic
Cam disc	C
Earth fault sensitivity	30 mA
Suitability for insulation	No, complies with IEC 60947-1
Conformity marking	IMQ; NF; VDE; KEMA-KEUR
Mounting
Standards	EN/IEC 60947-2; EN/IEC 61009-2-1
Degree of protection (IP)	IP40 (distribution cabinet) corresponds to IEC 60529; IP20 corresponds to IEC 60529
Over voltage category	III corresponds to IEC 60364
Electromagnetic compatibility	8/20 µs impulse resistance, 3,000 A conforms to EN/IEC 61009-2-1
Drip-proof	2
Relative humidity	95 % at 55 °C
Operating ambient temperature	-25…60 °C
Ambient temperature during storage	-40…70 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	7,500 cm
VPE 1 width	8,000 cm
VPE 1 length	10,000 cm
Packaging weight (Lbs)	458,600 g
VPE 2 type	BB1
VPE 2 quantity	3
VPE 2 height	9,500 cm
VPE 2 width	11,000 cm
VPE 2 length	26,500 cm
VPE 2 weight	1,448 kg
VPE 3 type	S03
VPE 3 quantity	18
VPE 3 height	30,000 cm
VPE 3 width	30,000 cm
VPE 3 length	40,000 cm
VPE 3 weight	9,262 kg

Residual current circuit breaker with overcurrent protection (FI/LS) Acti 9 iC60N, 6kA (IEC/EN 61009-1 and IEC/EN 61009-2-1), 6kA (IEC/EN 60947-2). 4-pole, nominal current 32A, C characteristic, earth fault sensitivity 30mA, earth fault protection class type A SI, operating voltage (Ue) 230V AC, insulation voltage (Ui) 500V AC. Guarantees comprehensive protection of final circuits against overcurrents and fault currents. Switching and disconnecting circuits. Snap action for low-wear switching of the contacts. Mechanically separated red display when the circuit breaker is tripped or when it is tripped by a fault current. Clear switch position display through green marking on the device's switch knob. Test button for regular function testing. The SI (superimmunized) version is designed to maintain operational continuity in systems in which high transient leakage currents can occur due to operational reasons or external influences. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - auxiliary switch for status reporting (iOF), fault reporting switch (iSD), OF/SD switch with Ti24 interface for status reporting to a programmable logic controller (iOF/SD24). Tool-free installation on the left side of the device. Color RAL 9003. The FI/LS IC60N meets the following standards - IEC/EN 61009-1, IEC/EN 61009-2-1 and IEC/EN 60947-2. This series is also VDE certified!