Schneider Electric A9D56613, EAN: 3606480472701

Schneider Electric A9D56613 RCD 1p+N 30mA

Installation > Modular devices / equipment installation > RCD

Schneider Electric A9D56613 RCD 1p+N 30mA

Lieske Part No. 612701
Mfg Part No A9D56613
EAN-Code 3606480472701
Manufacturer Schneider Electric
Here only 138,70 EUR
165,05 EUR incl. VAT

Further information for Schneider Electric A9D56613 RCD 1p+N 30mA

Additional features
Device position in systemOutlet
[Ue] Operational rated voltage230 - 240 V AC 50 Hz
Threshold for magnetic actuation3 - 5 x In
Earth fault trip technologyVoltage-independent
Earth fault protection time delayInstantaneous
Earth fault protection classType A
Breaking capacity6000 A Icn at 230 - 240 V AC 50 Hz complies with EN/IEC 61009-2-1
Rated switching-off capacity Ics6000 A 100 % x Icn at 230 - 240 V AC 50 Hz conforming to EN/IEC 61009-2-1
Rated breaking force and rated powerIdm 6000 A at 230 - 240 V AC 50 Hz, complies with EN/IEC 61009-2-1
Limiting class3 corresponds to EN/IEC 61009-2-1
[Ui] Rated insulation voltage400 V AC 50 Hz
[Uimp] Rated impulse voltage withstand4 kV
Control typeToggle switch
Local signallingON, OFF, fault indication
Mounting modePlug-in
Mounting bracketDIN rail
Compatibility of comb rails and distribution blocksTop or bottom: yes
Terminal pitch9 mm between phase and neutral
9-mm pitch4
Height85 mm
Width36 mm
Depth73 mm
Product weight125 g
ColourWhite
Mechanical life20000 cycles
Electrical lifetime20000 cycles
Description of locking optionsPadlock
Connections - terminalsSingle terminal top or bottom 1…16 mm² solid; single terminal top or bottom 1…10 mm² fine-stranded; single terminal top or bottom 1…10 mm² fine-stranded with ferrule
Wire stripping length15 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionIntegrated
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iDPN Vigi
Product or component typeResidual current circuit breaker with overcurrent protection (FI/LS)
Device short nameiDPN N Vigi
Device applicationDistribution
Pole description1P + N
Number of protected poles1
Neutral positionLeft
[In] Rated current13 A
Type of networkAC
Network frequency50 Hz
Trigger technologyThermal-magnetic
Cam discB
Earth fault sensitivity30 mA
Suitability for insulationYes, complies with EN/IEC 60947-2
Mounting
StandardsEN/IEC 61009-2-1; EN/IEC 61009-1
Product certificationsVDE; KEMA
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 (modular housing) corresponds to IEC 60529
Pollution degree3
Over voltage categoryIII corresponds to IEC 60364
Electromagnetic compatibility8/20 µs impulse resistance, 250 A corresponds to EN/IEC 61009-2-1
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-25…60 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height8,000 cm
VPE 1 width4,000 cm
VPE 1 length9,800 cm
Packaging weight (Lbs)218,000 g
VPE 2 typeBB1
VPE 2 quantity6
VPE 2 height9,000 cm
VPE 2 width10,600 cm
VPE 2 length25,500 cm
VPE 2 weight1,367 kg
VPE 3 typeS03
VPE 3 quantity54
VPE 3 height30,000 cm
VPE 3 width30,000 cm
VPE 3 length40,000 cm
VPE 3 weight12,790 kg
Residual current circuit breaker with overcurrent protection (FI/LS) Acti 9 iDPN N Vigi, 6kA (IEC/EN 61009-2-1). 1-pole+N, nominal current 13A, B characteristic, earth fault sensitivity 30mA, earth fault protection class type A, operating voltage (Ue) 230V AC, insulation voltage (Ui) 400V AC. Guarantees comprehensive protection of final circuits against overcurrents and fault currents. Switching and disconnecting circuits. Snap action for low-wear switching of the contacts. Mechanically separated red display when the circuit breaker is tripped or when it is tripped by a fault current. Clear switch position display by green marking on the device's switch knob. Test button for regular function testing. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added (optional) - undervoltage release (iMN), overvoltage release (iMSU), shunt release (iMX), auxiliary switch for status reporting (iOF), fault reporting switch (iSD). Tool-free installation on the left side of the device. Color RAL 9003. The FI/LS IDPN N Vigi meets the following standards - IEC/EN 61009 and IEC/EN 60947-2. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/612701
qrcode für Schneider Electric A9D56613 RCD 1p+N 30mA