Additional features
Device position in system	Outlet
[Ue] Operational rated voltage	220 - 240 V AC 50 Hz
Threshold for magnetic actuation	5 - 10 x In
Earth fault trip technology	Voltage-independent
Earth fault protection time delay	Instantaneous
Earth fault protection class	Type A
Breaking capacity	10000 A Icn at 220 - 240 V AC 50 Hz complies with EN/IEC 61009-2-1; 15 kA Icu at 220 - 240 V AC 50 Hz complies with EN/IEC 60947-2
Rated switching-off capacity Ics	7500 A 75 % x Ics at 220 - 240 V AC 50 Hz conforming to EN/IEC 61009-2-1; 7.5 kA 50 % x Icu at 220 - 240 V AC 50 Hz conforming to EN/IEC 60947-2
Rated breaking force and rated power	Idm 6000 A at 220 - 240 V AC 50 Hz complies with EN/IEC 61009-2-1
Limiting class	3 corresponds to EN/IEC 61009-2-1
[Ui] Rated insulation voltage	500 V AC 50 Hz
[Uimp] Rated impulse voltage withstand	4 kV
Inrush current	250 A
Control type	Toggle switch
Local signalling	ON, OFF, fault indication
Mounting mode	Plug-in
Mounting bracket	DIN rail
Compatibility of comb rails and distribution blocks	Top or bottom: yes; bottom: dual-function terminal
Terminal pitch	9 mm between poles
9-mm pitch	4
Height	86 mm
Width	36 mm
Depth	78 mm
Product weight	273 g
Colour	White
Mechanical life	20000 cycles
Electrical lifetime	10000 cycles
Connections - terminals	Tunnel terminals top or bottom 1…35 mm² solid; tunnel terminals top or bottom 1…25 mm² fine-stranded; tunnel terminals top or bottom 1…25 mm² fine-stranded with ferrule
Wire stripping length	12 mm for top or bottom connection
[M] tightening torque	2 Nm
Earth fault protection	Integrated
Contact position indicator
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 iC60 RCBO
Product or component type	Residual current circuit breaker with overcurrent protection (FI/LS)
Device short name	iC60 FI/LS
Device application	Distribution
Pole description	2P
Number of protected poles	2
[In] Rated current	16 A
Type of network	AC
Network frequency	50 Hz
Trigger technology	Thermal-magnetic
Cam disc	C
Earth fault sensitivity	300 mA
Suitability for insulation	No, complies with IEC 60947-1
Conformity marking	VDE; NF; KEMA-KEUR; IMQ
Mounting
Standards	EN/IEC 60947-2; EN/IEC 61009-2-1
Degree of protection (IP)	IP40 (distribution cabinet) corresponds to IEC 60529; IP20 corresponds to IEC 60529
Over voltage category	III corresponds to IEC 60364
Electromagnetic compatibility	8/20 µs impulse resistance, 250 A corresponds to EN/IEC 61009-2-1
Drip-proof	2
Relative humidity	95 % at 55 °C
Operating ambient temperature	-25…60 °C
Ambient temperature during storage	-40…70 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	8,000 cm
VPE 1 width	4,000 cm
VPE 1 length	9,800 cm
Packaging weight (Lbs)	236,000 g
VPE 2 type	BB1
VPE 2 quantity	6
VPE 2 height	10,000 cm
VPE 2 width	11,500 cm
VPE 2 length	25,000 cm
VPE 2 weight	1,482 kg
VPE 3 type	S03
VPE 3 quantity	36
VPE 3 height	30,000 cm
VPE 3 width	30,000 cm
VPE 3 length	40,000 cm
VPE 3 weight	9,458 kg

Residual current circuit breaker with overcurrent protection (FI/LS) Acti 9 iC60H, 10kA (IEC/EN 61009-1 and IEC/EN 61009-2-1), 15kA (IEC/EN 60947-2). 2-pole, nominal current 16A, C characteristic, earth fault sensitivity 300mA, earth fault protection class type A, operating voltage (Ue) 230V AC, insulation voltage (Ui) 500V AC. Guarantees comprehensive protection of final circuits against overcurrents and fault currents. Switching and disconnecting circuits. Snap action for low-wear switching of the contacts. Mechanically separated red display when the circuit breaker is tripped or when it is tripped by a fault current. Clear switch position display through green marking on the device's switch knob. Test button for regular function testing. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added (optional) - auxiliary switch for status reporting (iOF), fault reporting switch (iSD), OF/SD switch with Ti24 interface for status reporting to a programmable logic controller (iOF/SD24). Tool-free installation on the left side of the device. Color RAL 9003. The FI/LS IC60H meets the following standards - IEC/EN 61009-1, IEC/EN 61009-2-1 and IEC/EN 60947-2. This series is also IMQ, NF, KEMA-KEUR, VDE certified!