Further information for Schneider Electric A9C70344 reclosing device ARA 4p
Complementary
Control type
Inhibition of automatism maintained 230 V AC 50/60 Hz; Ultimate reclosing impulse 230 V AC 50/60 Hz
Input current
5 mA
Impulse duration
>= 200 ms control circuit
Response time
< 500 ms
[Us] rated supply voltage
230 V AC 50/60 Hz
Power consumption in W
2 W
[Ui] rated insulation voltage
400 V
[Uimp] rated impulse withstand voltage
6 kV
Value of setting
Program 1: 15 reclosing attemps, long fixed cycle
Local signalling
Flashing orange LED: not operational; Flashing green LED: normal operation; Flashing red LED: reclosing cycle in progress; Fixed red LED: automatic recloser locked
Mounting mode
Clip-on
Mounting support
DIN rail
9 mm pitches
7
Height
93 mm
Width
63 mm
Depth
75.5 mm
Net weight
470 g
Colour
White
Electrical durability
5000 cycles
Provision for padlocking
Padlockable
Wire stripping length
Power supply: 10 mm for bottom connection; Input: 10 mm for bottom connection; Output: 8 mm for top connection
Tightening torque
Power supply: 1 N.m; Input: 1 N.m; Output: 0.7 N.m
Range compatibility
Acti9 iID residual current circuit breaker (RCCB)
Product compatibility
4P iID
Comb busbar and distribution block compatibility
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree
3 conforming to IEC 60947
Overvoltage category
II
Tropicalisation
2
Relative humidity
93 % at 40 °C
Ambient air temperature for storage
-40…70 °C
Ambient air temperature for operation
-25…60 °C
Logistical informations
Country of origin
ES
Main
range of product
Acti9
Product or component type
Automatic recloser auxiliary
Device short name
ARA iID
Signal contacts composition
2 OF volt-free contacts
Signalling circuit voltage
24 V 10 mA AC/DC; 230 V 1 A AC
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.000 cm
Package 1 Width
11.000 cm
Package 1 Length
16.000 cm
Package 1 Weight
505.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
14
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
7.550 kg
Automatisches Wiedereinschaltgerät Acti 9 ARA für Fehlerstromschutzschalter iID. 4-polig, Versorgungsspannung (Ue) 230V AC, Isolationsspannung (Ui) 400V, 1 Programm. Automatische Wiedereinschaltung der zugehörigen Schutzeinrichtung nach Auslösung. Erhöhung der Verfügbarkeit von nicht-überwachten Anlagen die einen erschwerten Zugriff sowie die Erforderlichkeit einer permanenten Anlagenverfügbarkeit aufweisen. Bei Wiedereinschaltung auf einen bestehenden Fehler, wird die Automatik je nach Programm gesperrt und ein manuelles Einschalten ist zwingend erforderlich. Programmwahl mit unterschiedlicher Anzahl von automatischen Wiedereinschaltversuchen und Wartezeiten zwischen den Versuchen. Das manuelle Schalten ist immer vorrangig gegenüber der Automatik. Plombierbare Abdeckung. Betriebsstatusanzeigeleuchte. Bistabiler Schaltmechanismus benötigt keine Halteleistung. Kompatibel mit der elektrischen Zusatzausrichtung für iC60. Farbton RAL 9003.