Schneider Electric A9C64410, EAN: 3606480455032

Schneider Electric A9C64410 circuit breaker 4-pole remote-controlled

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9C64410 circuit breaker 4-pole remote-controlled

Lieske Part No. 1768851
Mfg Part No A9C64410
EAN-Code 3606480455032
Manufacturer Schneider Electric
Here only 475,95 EUR
566,38 EUR incl. VAT

Further information for Schneider Electric A9C64410 circuit breaker 4-pole remote-controlled

Complementary
[In] rated current10 A
Network frequency50/60 Hz
Breaking capacity codeH
Breaking capacity30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Ui] rated insulation voltage500 V AC
Control typeON/OFF button; Remote control by pulse; Remote control by continuous command; Toggle
Control signal typeMaintained very low voltage; Maintained; Impulse
Local signallingFlashing LED: device tripped; Red LED: fault; Flashing LED: device overheat; Flashing LED: device ready; Green LED: device ON
[Uc] control circuit voltage230 V AC 50/60 Hz; 24 V AC 50/60 Hz; 48 V AC 50/60 Hz; 24 V DC; 48 V DC
[Us] rated supply voltage230 V AC at 50/60 Hz
Mounting modeFixed
Mounting support35 mm symmetrical DIN rail
9 mm pitches13
Height84 mm
Width117 mm
Depth77 mm
ColourWhite
Mechanical durability50000 cycles
Electrical durabilityAC-1: 50000 cycles AC 50 Hz
Provision for padlockingPadlockable
Locking options descriptionPadlock in OFF position
Earth-leakage protectionSeparate block
Product compatibilityWith PLC
Contact position indicatorYes
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree3
Tropicalisation2
Relative humidity93 % at 40 °C
Main
Device applicationDistribution; Control
RangeActi9
Product nameReflex iC60
Device short nameReflex iC60H
Product or component typeIntegrated control circuit breaker
Poles description4P
Number of protected poles4
Network typeAC
Trip unit technologyThermal-magnetic
Curve codeB
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height9 cm
Package 1 Width11.5 cm
Package 1 Length17 cm
Package 1 Weight792 g
Unit Type of Package 2S03
Number of Units in Package 214
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight11.524 kg
Remotely switchable circuit breaker Acti 9 Reflex iC60H, breaking capacity 30kA at 220-240V AC (EN/IEC 60947-2), 15kA at 380-415V AC (EN/IEC 60947-2). 4-pole, nominal current 10A, B characteristic, Ti24 interface, insulation voltage (Ui) 500V. Remote switching using pulse and/or continuous signal according to one of the three operating modes set by the user. Protecting circuits against short-circuit currents. Protecting circuits against overload currents. Disconnecting circuits. With Ti24 connection for direct connection to PLC or decentralized I/O. Bistable switching mechanism does not require holding power. Green display on the switch guarantees that the contacts are open and safe working is ensured on the output side. Snap action switching guarantees low-wear switching of the contacts. Operating status indicator light. Can be controlled using three adjustable operating modes using the push button on the front of the device. Protection class IP20. The iMDU coupling relay can be used to control inputs Y1 and Y2 using 24/48V AC/DC. Color RAL 9003. The remotely switchable Reflex iC60H circuit breaker complies with the following standards IEC/EN 60947-2.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1768851
qrcode für Schneider Electric A9C64410 circuit breaker 4-pole remote-controlled