Additional features
[In] Rated current	40 A
Network frequency	50/60 Hz
Breaking capacity	N
[Ui] Rated insulation voltage	500 V AC
Control type	Remote control via continuous command; ON/OFF button; Toggle switch; Remote control via pulse
Control signal type	Maintained; retention of a very low voltage; impulse
Local signalling	Flashing LED: device overheat; Red LED: fault; Flashing LED: device ready; Green LED: device ON; Flashing LED: device tripped
[Uc] control circuit voltage	230 V AC 50/60 Hz; 24 V AC 50/60 Hz; 48 V AC 50/60 Hz; 24 V DC; 48 V DC
[UH,nom] Rated operating voltage	230 V AC at 50/60 Hz
Mounting mode	Fixed
Mounting bracket	35 mm symmetrical DIN rail
9-mm pitch	9
Height	84 mm
Width	81 mm
Depth	77 mm
Colour	White
Mechanical life	50000 cycles
Electrical lifetime	AC-1: 50000 cycles AC 50 Hz
Provisions for padlocks	Lockable
Description of locking options	Padlock in OFF position
Earth fault protection	Separate block
Product compatibility	With PLC
Contact position indicator
Contractual warranty
Warranty (in months)	18
Main features
Device application	Control; Distribution
Product series	Acti9
Product name	Reflex iC60
Device short name	Reflex iC60N
Product or component type	Built-in control power switch
Pole description	2P
Number of protected poles	2
Type of network	AC
Trigger technology	Thermal-magnetic
Cam disc	B
Mounting
Degree of protection (IP)	IP20 complies with IEC 60529
Pollution degree	3
Drip-proof	2
Relative humidity	93 % at 40 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	9 cm
VPE 1 width	11 cm
VPE 1 length	16,5 cm
Packaging weight (Lbs)	569,9 g
VPE 2 type	S03
VPE 2 quantity	14
VPE 2 height	30 cm
VPE 2 width	30 cm
VPE 2 length	40 cm
VPE 2 weight	8,467 kg

Remotely switchable circuit breaker Acti 9 Reflex iC60N, breaking capacity 20kA at 220-240V AC (EN/IEC 60947-2), 10kA at 380-415V AC (EN/IEC 60947-2). 2-pole, nominal current 40A, B characteristic, Ti24 interface, insulation voltage (Ui) 500V. Remote switching using pulse and/or continuous signal according to one of the three operating modes set by the user. Protecting circuits against short-circuit currents. Protecting circuits against overload currents. Disconnecting circuits. With Ti24 connection for direct connection to PLC or decentralized I/O. Bistable switching mechanism does not require holding power. Green display on the switch guarantees that the contacts are open and safe working is ensured on the output side. Snap action switching guarantees low-wear switching of the contacts. Operating status indicator light. Can be controlled using three adjustable operating modes using the push button on the front of the device. Protection class IP20. The iMDU coupling relay can be used to control inputs Y1 and Y2 using 24/48V AC/DC. Color RAL 9003. The remotely switchable Reflex iC60N circuit breaker complies with the following standards IEC/EN 60947-2.