| Complementary |
| Network frequency | 50/60 Hz |
| [Ue] rated operational voltage | 250 V AC 50/60 Hz |
| Control type | Remote and manual control; Coil deconnection |
| Control signal type | Impulse |
| Switching frequency | 5 switching operations/minute; 100 switching operations/day |
| Impulse duration | 50 ms...1 s |
| Remote control type | Illuminated push-button 3 mA |
| Local signalling | ON/OFF indication |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| 9 mm pitches | 2 |
| Height | 84 mm |
| Width | 18 mm |
| Depth | 60 mm |
| Electrical durability | AC-21: 200000 cycles; AC-22: 100000 cycles |
| Wire stripping length | 11 mm |
| Tightening torque | 1 N.m |
| Range compatibility | Acti9 iATEt; Acti9 iATL4; Acti9 iATLc; Acti9 iATLc+s; Acti9 iATLm; Acti9 iATLs; Acti9 iATLz; Acti9 iETL iTL 16; Acti9 iATLc+c; Acti9 iATL24 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN 669-1; EN 669-2-2 |
| Product certifications | GOST |
| Quality labels | NF; CEBEC; KEMA; VDE; IMQ |
| Noise level | 60 dB |
| IP degree of protection | IP20 conforming to IEC 60529 (on opening); IP40 conforming to IEC 60529 (in enclosure) |
| Pollution degree | 3 |
| Tropicalisation | 2 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -20…50 °C |
| Ambient air temperature for storage | -40…70 °C |
| Logistical informations |
| Country of origin | BE |
| Main |
| range of product | Acti9 |
| Product name | Acti9 iTL |
| Product or component type | Impulse relay |
| Device short name | iTL |
| Device application | Standard |
| Poles | 2P |
| Pole contact composition | 2 NO |
| [In] rated current | 16 A |
| Network type | AC |
| [Uc] control circuit voltage | 230...240 V AC 50/60 Hz; 110 V DC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7 cm |
| Package 1 Width | 1.8 cm |
| Package 1 Length | 8.5 cm |
| Package 1 Weight | 110 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 8.5 cm |
| Package 2 Width | 9.5 cm |
| Package 2 Length | 22.5 cm |
| Package 2 Weight | 1.378 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 144 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 17.035 kg |
The article A9C30812 is an
impulse relay from the
Acti9 product range by Schneider Electric, specifically designed as a
remote switch iTL. It is used for remote switching functions in electrical installations, particularly for switching lighting circuits, where multiple switches at different locations can trigger the switching operation. The device is designed for use in installation enclosures and is mounted on a
DIN rail, occupying a
9-mm pitch of 2 units. The
protection rating IP20 (when open) and
IP40 (inside the enclosure) according to IEC 60529 ensures sufficient protection against contact and contamination in enclosed switchgear.
Applications
The impulse relay A9C30812 is intended for use in
standard applications within electrical installations. It is particularly suitable for controlling lighting systems in residential and commercial buildings, where central or decentralized control via multiple switches is required.
Remote control is achieved via a luminous push-button with a current consumption of 3 mA, enabling switching operations even over long cable runs.
Manual control also allows direct actuation of the relay, which is useful during maintenance or emergencies.
Functions and Equipment in Detail
The device features
2 poles and
2 make contacts (2 S), with a
rated current of 16 A. The
operating rated voltage is 250 V AC, allowing use in typical low-voltage installations. The
control voltage (Uc) can be either 230–240 V AC (50/60 Hz) or 110 V DC, enabling flexible integration into existing control circuits. The
pulse duration ranges from 50 ms to 1 second, with a
switching frequency of up to 5 operations per minute or 100 per day. This is sufficient for typical applications such as switching lamps or small electrical loads.
Technology Explained Simply
The relay operates on the principle of an
impulse relay, where the switching operation is triggered by a short pulse. The coil is briefly energized, causing the contact to close. After the pulse ends, the contact remains in the new position until another control signal is received. The
coil deactivation allows for safe deactivation of the control.
Local signaling is provided by an
ON/OFF indicator, visually displaying the relay’s current state. The
electrical life expectancy is 200,000 cycles at AC-21 and 100,000 cycles at AC-22, ensuring high operational reliability and long service life.
Compatibility and Accessories
The device is part of the
Acti9 product family and is compatible with various modules such as
iATEt,
iATL4,
iATLc,
iATLc+s,
iATLm,
iATLs,
iATLz,
iETL iTL 16,
iATLc+c, and
iATL24. It can be combined with accessories such as the
expansion module A9C32816 or the
auxiliary module A9C15424 for Ti24-PLC interfaces. Additional compatible modules include the
remote indicator A9C15405, the
time delay module A9C15419, and the
central control module A9C15409, which enable extended functionality such as time delay, central on/off switching, or remote indication.
Mounting and Installation
Mounting is done on a
DIN rail inside the enclosure. Dimensions are
84 mm height,
18 mm width, and
60 mm depth. Connections are made via
tunnel terminals, supporting cable cross-sections of 0.5 to 4 mm² (solid or stranded, with or without wire end ferrules) for the control circuit, and 1.5 to 4 mm² (solid or stranded, with or without wire end ferrules) for the power circuit. The
wire stripping length is 11 mm, and the
tightening torque for the terminals is 1 Nm. The
ambient temperature during operation ranges from -20 °C to 50 °C, and during storage from -40 °C to 70 °C. The
relative humidity is up to 95 % at 55 °C. The
noise level is 60 dB, ensuring quiet operation.
Advantages in Operation
The impulse relay A9C30812 offers a reliable and low-maintenance switching function with a long service life. The combination of
remote and manual control along with
local signaling enhances usability and transparency.
Compatibility with various modules allows flexible expansion of functionality.
DIN rail mounting and
standardized dimensions simplify integration into existing switchgear.
Coil deactivation provides additional safety during commissioning and maintenance.