Schneider Electric A9C21732, EAN: 3606480088636

Schneider Electric A9C21732 heating contactor 25A 230V

Installation > Modular devices / equipment installation > Heating contactor

Schneider Electric A9C21732 heating contactor 25A 230V

Lieske Part No. 1768763
Mfg Part No A9C21732
EAN-Code 3606480088636
Manufacturer Schneider Electric
Here only 69,92 EUR
83,20 EUR incl. VAT

Further information for Schneider Electric A9C21732 heating contactor 25A 230V

Complementary
Network frequency50 Hz
[Ue] rated operational voltage250 V AC 50 Hz
Maximum power1.2 W at 250 V AC
[Ui] rated insulation voltage500 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage4 kV
Control signal typeMaintained
Switching frequency100 switching operations/day
Local signallingAction indicator
Hold-in power consumption in VA2.7 VA
Inrush power in VA9.2 VA
Mounting modeClip-on
Mounting support35 mm symmetrical DIN rail
9 mm pitches2
Height81 mm
Width18 mm
Depth60 mm
ColourWhite
Mechanical durability1000000 cycles
Electrical durability100000 cycles IEC/EN 61095 25 A 50 Hz AC-7A; 30000 cycles IEC/EN 61095 8.5 A 50 Hz AC-7B; 30000 cycles IEC/EN 61095 50 Hz AC-7C
Connections - terminalsControl circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid; Power circuit: tunnel type terminals1 cable(s) 1…4 mm² flexible; Power circuit: tunnel type terminals1 cable(s) 1.5…6 mm² rigid; Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid; Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible
Tightening torqueControl circuit: 0.8 N.m; Power circuit: 0.8 N.m
Product compatibilityIACTs; IACTc; IACTp; IATEt
Compatibility codeICT
Market segmentSmall commercial; Residential
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC/EN 61095
Noise level30 dB
IP degree of protectionIP20
Pollution degree2
Tropicalisation2 conforming to IEC/EN 61095
Relative humidity95 % at 55 °C
Operating altitude2000 m
Ambient air temperature for operation-5…60 °C
Ambient air temperature for storage-40…70 °C
Logistical informations
Country of originFR
Main
range of productActi9
Product nameActi9 iCT
Product or component typeContactor
Device short nameiCT
Device applicationMotor-heating-lighting
Poles2P
[Ie] rated operational current25 A AC-7A; 8.5 A AC-7B
Pole contact composition2 NO
Network typeAC
Control typeRemote and manual control
[Uc] control circuit voltage230...240 V AC 50 Hz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.370 cm
Package 1 Width2.030 cm
Package 1 Length8.640 cm
Package 1 Weight120.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height7.900 cm
Package 2 Width9.400 cm
Package 2 Length22.900 cm
Package 2 Weight1.490 kg
Unit Type of Package 3S03
Number of Units in Package 3144
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight18.368 kg
Installation contactor Acti 9 iCT. Nominal current 25A, 2S, control voltage 230/240V, 50Hz, MO, insulation voltage (Ui) 500V AC. Switching of circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have a front-side operating mode selector switch with four switch positions. Compatible with the entire Acti 9 product range. The iCT installation contactor meets the following standards - EN 61095 and IEC 1095. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1768763
qrcode für Schneider Electric A9C21732 heating contactor 25A 230V