Schneider Electric A9C21142, EAN: 3606480375255

Schneider Electric A9C21142 heating contactor 40 A 24 V

Installation > Modular devices / equipment installation > Heating contactor

Schneider Electric A9C21142 heating contactor 40 A 24 V

Lieske Part No. 1769073
Mfg Part No A9C21142
EAN-Code 3606480375255
Manufacturer Schneider Electric
Here only 158,17 EUR
188,22 EUR incl. VAT

Further information for Schneider Electric A9C21142 heating contactor 40 A 24 V

Complementary
Network frequency50 Hz
[Ue] rated operational voltage250 V AC 50 Hz
Maximum power1.6 W at 250 V AC
[Ui] rated insulation voltage500 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage4 kV
Control signal typeMaintained
Switching frequency100 switching operations/day
Local signallingAction indicator
Hold-in power consumption in VA4.6 VA
Inrush power in VA34 VA
Mounting modeClip-on
Mounting support35 mm symmetrical DIN rail
9 mm pitches4
Height85 mm
Width36 mm
Depth73.5 mm
ColourWhite
Mechanical durability1000000 cycles
Electrical durability100000 cycles IEC/EN 61095 40 A 50 Hz AC-7A; 30000 cycles IEC/EN 61095 15 A 50 Hz AC-7B; 30000 cycles IEC/EN 61095 50 Hz AC-7C
Connections - terminalsControl circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid; Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid; Power circuit: tunnel type terminals1 cable(s) 6…16 mm² flexible; Power circuit: tunnel type terminals1 cable(s) 6…25 mm² rigid; Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible
Tightening torqueControl circuit: 0.8 N.m; Power circuit: 3.5 N.m
Product compatibilityIATEt; IACTp; IACTc; IACTs
Compatibility codeICT
Market segmentResidential; Small commercial
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC/EN 61095
Noise level30 dB
IP degree of protectionIP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree2
Tropicalisation2 conforming to IEC/EN 61095
Relative humidity95 % at 55 °C
Operating altitude2000 m
Ambient air temperature for operation-5…60 °C
Ambient air temperature for storage-40…70 °C
Logistical informations
Country of originFR
Main
range of productActi9
Product nameActi9 iCT
Product or component typeContactor
Device short nameiCT
Device applicationMotor-heating-lighting
Poles2P
[Ie] rated operational current40 A AC-7A; 15 A AC-7B
Pole contact composition2 NO
Network typeAC
Control typeRemote and manual control
[Uc] control circuit voltage24 V AC 50 Hz
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.200 cm
Package 1 Width10.800 cm
Package 1 Length12.400 cm
Package 1 Weight259.000 g
Unit Type of Package 2BB1
Number of Units in Package 26
Package 2 Height11.500 cm
Package 2 Width12.500 cm
Package 2 Length25.000 cm
Package 2 Weight1.630 kg
Unit Type of Package 3S03
Number of Units in Package 336
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight10.262 kg
Installation contactor Acti 9 iCT. Nominal current 40A, 2S, control voltage 24V, 50Hz, MO, insulation voltage (Ui) 500V AC. Switching of circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have a front-side operating mode selector switch with four switch positions. Compatible with the entire Acti 9 product range. The iCT installation contactor meets the following standards - EN 61095 and IEC 1095. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1769073
qrcode für Schneider Electric A9C21142 heating contactor 40 A 24 V