Complementary
Network frequency	50 Hz
[Ue] rated operational voltage	250 V AC 50 Hz
Maximum power	AC-7A: 2.1 W at 250 V AC 50 Hz
[Ui] rated insulation voltage	500 V AC 50 Hz
[Uimp] rated impulse withstand voltage	4 kV
Control signal type	Maintained
Switching frequency	100 switching operations/day
Local signalling	Action indicator
Hold-in power consumption in VA	6.5 VA
Inrush power in VA	53 VA
Mounting mode	Clip-on
Mounting support	35 mm symmetrical DIN rail
9 mm pitches	6
Height	85 mm
Width	54 mm
Depth	60 mm
Colour	White
Electrical durability	30000 cycles EN 61095 250 V 16 A AC 50 Hz AC-7A; 30000 cycles UTE C 61-481 250 V 6 A AC 50 Hz AC-7A; 30000 cycles IEC 61095 250 V AC 50 Hz AC-7A
Connections - terminals	Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid; Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid; Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible; Power circuit: tunnel type terminals1 cable(s) 6…35 mm² solid or flexible
Tightening torque	Power circuit: 3.5 N.m; Control circuit: 0.8 N.m A1 / A2
Product compatibility	IACTs; IACTp; IATEt; IACTc
Compatibility code	ICT
Market segment	Small commercial; Residential
Contractual warranty
Warranty (in months)	18
Environment
Standards	UTE C 61-481; IEC 61095; EN 61095
Noise level	30 dB
IP degree of protection	IP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree	2
Tropicalisation	2 conforming to EN 60947-4-1
Relative humidity	95 % at 55 °C
Operating altitude	2000 m
Ambient air temperature for operation	-5…60 °C
Ambient air temperature for storage	-40…70 °C
Logistical informations
Country of origin	FR
Main
range of product	Acti9
Product name	Acti9 iCT
Product or component type	Contactor
Device short name	iCT
Device application	Heating-low inductive load
Poles	2P
[Ie] rated operational current	100 A AC-7A
Pole contact composition	2 NO
Network type	AC
Utilisation category	AC-1 conforming to EN 60947-4-1; AC-7A conforming to EN 61095; AC-7A conforming to IEC 61095; AC-7A conforming to UTE C 61-481; AC-1 conforming to IEC 60947-4-1
Control type	Remote control
[Uc] control circuit voltage	220...240 V AC 50 Hz
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	6.000 cm
Package 1 Width	11.200 cm
Package 1 Length	12.200 cm
Package 1 Weight	351.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	4
Package 2 Height	11.500 cm
Package 2 Width	12.600 cm
Package 2 Length	25.000 cm
Package 2 Weight	1.485 kg
Unit Type of Package 3	S03
Number of Units in Package 3	24
Package 3 Height	30.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	9.285 kg

Installation contactor Acti 9 iCT. Nominal current 100A, 2S, control voltage 220/240V, 50Hz, insulation voltage (Ui) 500V AC. Switching of circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have a front-side operating mode selector switch with four switch positions. Compatible with the entire Acti 9 product range. The iCT installation contactor meets the following standards - EN 61095 and IEC 1095. This series is also VDE certified!