| Complementary |
| Mounting mode | Fixed, on the left of CT |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Bottom: YES; Top: NO |
| 9 mm pitches | 2 |
| Height | 81 mm |
| Width | 18 mm |
| Depth | 68 mm |
| Colour | White |
| Overvoltage category | III |
| [Uimp] rated impulse withstand voltage | 4 kV |
| [Ui] rated insulation voltage | 440 V |
| Immunity to microbreaks | 10 ms |
| Undervoltage behaviour | No opening if loss of 24 V DC |
| Standards | IEC 60947-1 annex S |
| Quality labels | CE |
| Electrical durability | 250000 cycles conforming to IEC 60947-5-1 |
| Connections - terminals | Control circuit: tunnel type terminals 2 cable(s) 2.5 mm² flexible; Control circuit: tunnel type terminals 2 cable(s) 1.5 mm² rigid; Auxiliary supply: tunnel type terminals 2 cable(s) 2.5 mm² flexible; Auxiliary supply: tunnel type terminals 2 cable(s) 1.5 mm² rigid; Control circuit: spring-loaded terminal Ti24 2 cable(s) 0.25…0.75 mm² flexible; Control circuit: spring-loaded terminal Ti24 1 cable(s) 0.5…1.5 mm² flexible |
| Wire stripping length | Control circuit: 10 mm for bottom connection; Auxiliary supply: 10 mm for bottom connection; Control circuit: 10 mm for top connection |
| Tightening torque | Control circuit: 1 N.m bottom; Auxiliary supply: 1 N.m bottom |
| Product compatibility | ICT 230/240 V 50 Hz; With PLC; ICT 220 V 50 Hz; Acti 9 Smartlink; ICT 220/240 V 50 Hz |
| Market segment | Residential; Small commercial |
| Compatibility code | IACT24 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60439-1 |
| Tropicalisation | 2 conforming to IEC 60947-5-1 |
| Relative humidity | 93 % at 40 °C conforming to IEC 60068-2 |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…80 °C |
| Logistical informations |
| Country of origin | ES |
| Main |
| Range | Acti9 |
| Product or component type | Control and indication auxiliary |
| Device short name | iACT24 |
| Signal contacts composition | 1 NO |
| Signalling circuit voltage | 24 V DC: - 20...20 % 0.002...0.1 A |
| [Uc] control circuit voltage | 230 V AC 50/60 Hz maintained >= 200 ms; 24 V DC falling edge; 24 V DC rising edge |
| Control type | Remote control |
| [Us] rated supply voltage | 230 V AC at 50/60 Hz |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.700 cm |
| Package 1 Width | 7.600 cm |
| Package 1 Length | 8.600 cm |
| Package 1 Weight | 84.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 108 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 9.546 kg |
Acti 9 communication system, connectable devices without Ti24 interface. Auxiliary module iACT24 for remote switch iCT with Ti24 interface, 24V DC. Type iACT24. Energy meter with pulse output, e.g. iEM3110. Measuring devices according to the IEC 62053-21 standard. 24 V DC indicator lights, Harmony XVL range. All consumers not exceeding 100 mA, 24 V DC. Twilight switch IC2000. Timers, thermostats, time switches, load shedding contactors. All 24 V DC auxiliary contacts, IEC 61131-2 Type 1.