Complementary
[Ui] rated insulation voltage	440 V
[Uimp] rated impulse withstand voltage	4 kV
Mounting mode	Fixed, on right side of TL
Mounting support	DIN rail
9 mm pitches	2
Height	86 mm
Width	18 mm
Depth	71 mm
Colour	White
Connections - terminals	Tunnel type terminals0.5…4 mm² - rigid; Tunnel type terminals0.5…4 mm² - rigid - with cable end; Tunnel type terminals1…4 mm² - flexible; Tunnel type terminals1…4 mm² - flexible - with cable end
Wire stripping length	11 mm
Tightening torque	1 N.m
Range compatibility	Acti9 iTL; Acti9 iTLi; Acti9 iTLs
Product compatibility	ITL (32 A); ITL (16 A)
Contractual warranty
Warranty (in months)	18
Environment
Overvoltage category	III
IP degree of protection	IP20 conforming to IEC 60529
Tropicalisation	2
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-20…50 °C
Ambient air temperature for storage	-40…70 °C
Standards	EN/IEC 60669-2-2
Logistical informations
Country of origin	BE
Main
range of product	Acti9
Device short name	iATLc+s
Product or component type	Centralized control and remote indication auxiliary
Signal contacts composition	1 C/O
Signalling circuit voltage	24 V AC/DC: 10 mA; 12...240 V AC: 50/60 Hz 6 A; 12...24 V DC: 6 A; 15...240 V AC: 50/60 Hz 2 A; 13...24 V DC: 2 A
[Uc] control circuit voltage	24...240 V AC 50/60 Hz
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.900 cm
Package 1 Width	2.900 cm
Package 1 Length	9.400 cm
Package 1 Weight	74.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	8
Package 2 Height	8.600 cm
Package 2 Width	10.000 cm
Package 2 Length	26.600 cm
Package 2 Weight	650.000 g
Unit Type of Package 3	S03
Number of Units in Package 3	72
Package 3 Height	30.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	6.354 kg

Central switching on and off Acti 9 iATLc+s. Operating voltage (Ue) 24-240V AC. Used for central switching on and off of a group of remote switches via a control line. At the same time, individual on-site operation using buttons is possible for each remote switch and for remote display of the switching status of each individual remote switch.