Complementary
Range compatibility	Acti9 iC60H RCBO; Acti9 iC60H RCBO PoN; Acti9 iC60H2 RCBO; Acti9 iC60N RCBO; Acti9 iKQE RCBO; Acti9 iCVm40; Acti9 iCVr40; Acti9 iDDm40
Operating mode	Daisy chain up to 100 devices
[Ui] rated insulation voltage	500 V
[Uimp] rated impulse withstand voltage	4 kV
Local signalling	Mechanical indicator
Mounting mode	Clip-on
Mounting location	Left side of circuit-breaker
Mounting support	DIN rail
Comb busbar and distribution block compatibility	Top: YES
Height	86 mm
Width	9 mm
Depth	73 mm
Net weight	32 g
Colour	White
Connections - terminals	Screw clamp terminal (bottom): 1 cable(s) 1…4 mm² - rigid; Screw clamp terminal (bottom): 1 cable(s) 0.5…2.5 mm² - flexible; Screw clamp terminal (bottom): 2 cable(s) 2.5 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length	10 mm
Tightening torque	1 N.m bottom
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Pollution degree	3
Tropicalisation	2
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	IN
Main
range of product	Acti9
Product or component type	Fault contact
Device short name	iSD
Signal contacts composition	1 C/O
[In] rated current	2…100 mA at 24...240 V, AC 50/60 Hz; 2…100 mA at 24 V, DC; 2…100 mA at 48 V, DC; 2…100 mA at 60 V, DC; 2…100 mA at 130 V, DC; 2…100 mA at 220 V, DC
9 mm pitches	1
Standards	EN/IEC 60947-5-1; EN/IEC 60947-5-4; GB/T 14048.5; GB/T 14048.17
Product certifications	CE; UKCA
Quality labels	EAC; CCC
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	2.200 cm
Package 1 Width	8.000 cm
Package 1 Length	9.300 cm
Package 1 Weight	40.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	12
Package 2 Height	8.500 cm
Package 2 Width	10.000 cm
Package 2 Length	27.000 cm
Package 2 Weight	562.000 g
Unit Type of Package 3	S03
Number of Units in Package 3	120
Package 3 Height	30.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	6.257 kg

This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Fault, signaling contact. Intended for installations in small commercial premises, buildings, critical infrastructure, healthcare, industry, data centers. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA and iC60 RCBO. This fault contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². The iSD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). It has a screw terminal connection on the bottom. The connection is suitable for rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection on the bottom allows a cable cross section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². It has a screw terminal connection on the bottom. The connection is possible flexibly with ferrule copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9 mm increments is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with EN/IEC 60947-5-1 and EN/IEC 60947-5-4. This product is certified with CE and UKCA marks.