Schneider Electric A9A26914, EAN: 3606482129139

Schneider Electric A9A26914 auxiliary contact 24 VAC

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Schneider Electric A9A26914 auxiliary contact 24 VAC

Lieske Part No. 1104015
Mfg Part No A9A26914
EAN-Code 3606482129139
Manufacturer Schneider Electric
Here only 29,21 EUR
34,76 EUR incl. VAT

Further information for Schneider Electric A9A26914 auxiliary contact 24 VAC

Complementary
Range compatibilityActi9 iC60H RCBO; Acti9 iC60H RCBO PoN; Acti9 iC60H2 RCBO; Acti9 iC60N RCBO; Acti9 iKQE RCBO; Acti9 iSW; Acti9 iCVm40; Acti9 iCVr40; Acti9 iDDm40
Operating modeDaisy chain up to 100 devices
[Ui] rated insulation voltage500 V
[Uimp] rated impulse withstand voltage4 kV
Mounting modeClip-on
Mounting locationLeft side of circuit-breaker
Mounting supportDIN rail
Comb busbar and distribution block compatibilityTop: YES
Height86 mm
Width9 mm
Depth73 mm
Net weight32 g
ColourWhite
Connections - terminalsScrew clamp terminal (bottom): 1 cable(s) 1…4 mm² - rigid; Screw clamp terminal (bottom): 1 cable(s) 0.5…2.5 mm² - flexible; Screw clamp terminal (bottom): 2 cable(s) 2.5 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length10 mm
Tightening torque1 N.m bottom
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Pollution degree3
Tropicalisation2
Relative humidity95 % at 55 °C
Ambient air temperature for operation-25…70 °C
Ambient air temperature for storage-40…85 °C
Logistical informations
Country of originIN
Main
range of productActi9
Product or component typeOC contact
Device short nameiOF
Signal contacts composition1 C/O
[In] rated current2…100 mA at 24...240 V, AC 50/60 Hz; 2…100 mA at 24 V, DC; 2…100 mA at 48 V, DC; 2…100 mA at 60 V, DC; 2…100 mA at 130 V, DC; 2…100 mA at 220 V, DC
9 mm pitches1
StandardsEN/IEC 60947-5-1; EN/IEC 60947-5-4; GB/T 14048.5; GB/T 14048.17
Product certificationsCE; UKCA
Quality labelsEAC; CCC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.100 cm
Package 1 Width8.000 cm
Package 1 Length9.400 cm
Package 1 Weight40.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height8.500 cm
Package 2 Width10.000 cm
Package 2 Length27.000 cm
Package 2 Weight561.000 g
Unit Type of Package 3S03
Number of Units in Package 3120
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight6.255 kg
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Open / Closed, auxiliary contact. It is intended for new or renovated installations in small commercial premises, buildings, critical buildings, healthcare, industry, data centers and infrastructures. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA and iC60 RCBO. This OC contact is compatible with Acti9 devices such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². The iOF is used for either the device short name or the compatibility code. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². Screw terminal connection at the bottom allows a cable cross-section of 0.5 mm² to 2.5 mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross-section 2 cables allows a cable cross-section of 2.5mm². It has a screw terminal connection at the bottom. The connection enables the flexible use of copper cables with ferrules (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse withstand voltage (Uimp) is 4 kV. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The tightening torque of the connection is 1 N.m (bottom) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -25 ° C and + 70 ° C. The storage temperature is between -40 ° C and + 85 ° C. This product complies with the EN/IEC 60947-5-1 and EN/IEC 60947-5-4 standards. This product is certified with the CE and UKCA mark.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1104015
qrcode für Schneider Electric A9A26914 auxiliary contact 24 VAC