This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at 240VAC and from 100mA to 3A at a frequency of 50Hz to 60Hz at 415VAC. Operating current at 100mA at 24VDC to 130VDC. Operating current of 6A at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with 1 changeover contact type contacts. Intended for installations in small commercial establishments or buildings. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA, iC60 RCBO. This fault contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA and iDD40. The iSD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection on the bottom allows a cable cross section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². It has a screw terminal connection at the bottom. The connection is flexible with ferrule copper cables (2 cables). The cable cross section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9 mm increments is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -35°C and +70°C. The storage temperature is between -40°C and +85°C. This product complies with EN/IEC 60947-5-1 and GB/T 14048.5. This product is certified with the CE and UKCA mark.