Schneider Electric A9A26907, EAN: 3606486115183

Schneider Electric A9A26907 auxiliary contact 1We 100 mA to 6 A

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Schneider Electric A9A26907 auxiliary contact 1We 100 mA to 6 A

Lieske Part No. 1104020
Mfg Part No A9A26907
EAN-Code 3606486115183
Manufacturer Schneider Electric
Here only 42,23 EUR
50,25 EUR incl. VAT

Further information for Schneider Electric A9A26907 auxiliary contact 1We 100 mA to 6 A

Complementary
Range compatibilityActi9 iC60H RCBO; Acti9 iC60H RCBO PoN; Acti9 iC60H2 RCBO; Acti9 iC60N RCBO; Acti9 iKQE RCBO; Acti9 iCVm40; Acti9 iCVr40; Acti9 iDDm40
[Ui] rated insulation voltage500 V
[Uimp] rated impulse withstand voltage4 kV
Local signallingMechanical indicator
Mounting modeClip-on
Mounting locationLeft side of circuit-breaker
Mounting supportDIN rail
Comb busbar and distribution block compatibilityTop: YES
Height86 mm
Width9 mm
Depth73 mm
Net weight33 g
ColourWhite
Connections - terminalsScrew clamp terminal (bottom): 1 cable(s) 0.5…2.5 mm² - flexible; Screw clamp terminal (bottom): 1 cable(s) 1…4 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 2.5 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length10 mm
Tightening torque1 N.m bottom
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Pollution degree3
Tropicalisation2
Relative humidity95 % at 55 °C
Ambient air temperature for operation-35…70 °C
Ambient air temperature for storage-40…85 °C
Logistical informations
Country of originIN
Main
range of productActi9
Product or component typeFault contact
Device short nameiSD
Signal contacts composition1 C/O
[In] rated current0.1…6 A at 24...240 V, AC 50/60 Hz; 0.1…3 A at 415 V, AC 50/60 Hz; 0.1…6 A at 24 V, DC; 0.1…2 A at 48 V, DC; 0.1…1.5 A at 60 V, DC; 0.1…1 A at 130 V, DC
9 mm pitches1
StandardsEN/IEC 60947-5-1; GB/T 14048.5
Product certificationsCE; UKCA
Quality labelsEAC; CCC; CMIM
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.100 cm
Package 1 Width8.000 cm
Package 1 Length9.300 cm
Package 1 Weight40.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height8.500 cm
Package 2 Width9.700 cm
Package 2 Length27.000 cm
Package 2 Weight569.000 g
Unit Type of Package 3S03
Number of Units in Package 3120
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight6.380 kg
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at 240VAC and from 100mA to 3A at a frequency of 50Hz to 60Hz at 415VAC. Operating current at 100mA at 24VDC to 130VDC. Operating current of 6A at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with 1 changeover contact type contacts. Intended for installations in small commercial establishments or buildings. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA, iC60 RCBO. This fault contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA and iDD40. The iSD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection on the bottom allows a cable cross section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². It has a screw terminal connection at the bottom. The connection is flexible with ferrule copper cables (2 cables). The cable cross section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9 mm increments is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -35°C and +70°C. The storage temperature is between -40°C and +85°C. This product complies with EN/IEC 60947-5-1 and GB/T 14048.5. This product is certified with the CE and UKCA mark.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1104020
qrcode für Schneider Electric A9A26907 auxiliary contact 1We 100 mA to 6 A