| Complementary |
| Range compatibility | Acti9 iC60; Acti9 iID double terminals residual current circuit breaker (RCCB) |
| [Ui] rated insulation voltage | 500 V |
| [Uimp] rated impulse withstand voltage | 4 kV |
| Mounting mode | Clip-on |
| Mounting location | Left side of circuit-breaker |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Bottom: YES |
| Height | 86 mm |
| Width | 9 mm |
| Depth | 73 mm |
| Net weight | 32 g |
| Colour | White |
| Connections - terminals | Screw clamp terminal (top): 1 cable(s) 1…4 mm² - rigid; Screw clamp terminal (top): 1 cable(s) 0.5…2.5 mm² - flexible; Screw clamp terminal (top): 2 cable(s) 2.5 mm² - rigid; Screw clamp terminal (top): 2 cable(s) 1.5 mm² - flexible with ferrule |
| Wire stripping length | 10 mm |
| Tightening torque | 1 N.m top |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Tropicalisation | 2 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -35…70 °C |
| Ambient air temperature for storage | -40…85 °C |
| Logistical informations |
| Country of origin | IN |
| Main |
| range of product | Acti9 |
| Product or component type | OC contact |
| Device short name | iOF |
| Signal contacts composition | 1 C/O |
| [In] rated current | 0.1…6 A at 24...240 V, AC 50/60 Hz; 0.1…3 A at 415 V, AC 50/60 Hz; 0.1…6 A at 24 V, DC; 0.1…2 A at 48 V, DC; 0.1…1.5 A at 60 V, DC; 0.1…1 A at 130 V, DC |
| 9 mm pitches | 1 |
| Standards | EN/IEC 60947-5-1; GB/T 14048.5 |
| Product certifications | CE; UKCA |
| Quality labels | EAC; CCC; CMIM |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.100 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 9.300 cm |
| Package 1 Weight | 41.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 8.500 cm |
| Package 2 Width | 10.000 cm |
| Package 2 Length | 27.000 cm |
| Package 2 Weight | 575.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 120 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 6.421 kg |
The auxiliary switch A9A26905 from the Acti9 product range by Schneider Electric is an
auxiliary switch OF (iOF) for visual or electrical indication of the operating position of a power switch. It functions as a
changeover contact (make/break), signaling the position OPEN or CLOSED of the main power switch. This enables safe and reliable monitoring of the switch status in electrical installations, particularly in small commercial enterprises or buildings, where clear status indication is important for maintenance and operation.
Applications
The auxiliary switch is designed for use in electrical distributions where feedback on the status of a power switch is required. It is commonly used in combination with power switches from the Acti9 family, particularly with the iC60 and iID (double-pole residual current circuit breaker) models. The application is for indoor use, where the protection rating IP20 is sufficient to prevent mechanical damage and contact with moving parts. The operating environment must have a relative humidity of up to 95 % at 55 °C and an ambient temperature between -35 °C and +70 °C.
Functions and Equipment in Detail
The switch features a
changeover contact that changes position when the main power switch is operated. This contact can be integrated into control circuits to, for example, switch a lamp, activate a relay, or inform a control system. The rated data are designed for various voltage and current ranges: For alternating current (AC 50/60 Hz), the rated current is 0.1 to 6 A at 24–240 V and 0.1 to 3 A at 415 V. For direct current (DC), the rated current is 0.1 to 6 A at 24 V, 0.1 to 2 A at 48 V, 0.1 to 1.5 A at 60 V, and 0.1 to 1 A at 130 V. The rated insulation voltage (Ui) is 500 V, and the rated impulse voltage withstand (Uimp) is 4 kV.
Technology Explained Simply
The auxiliary switch is designed as a
clip-on device and is mounted on the left side of a compatible power switch. Installation is done on a
DIN rail, with the device width being 9 mm, matching the standard spacing. Dimensions are 86 mm (height) × 9 mm (width) × 73 mm (depth). The color is white (RAL 9003). Connections are located at the top and consist of screw terminals that accept both rigid and flexible copper cables. For rigid cables, cross-sections from 1 to 4 mm² are possible; for flexible cables, 0.5 to 2.5 mm². When using two cables, the maximum cross-section is 2.5 mm² (rigid) or 1.5 mm² (flexible with wire end ferrule). The tightening torque is 1 Nm.
Compatibility and Accessories
The auxiliary switch is compatible with the Acti9 product ranges
iC60 and
iID double-pole residual current circuit breaker (RCCB). It can be combined with various power switches and protective switches to create a complete switching system. Combination with other Acti9 modules enables modular and flexible installation. Compliance with standards is confirmed by certifications
CE and
UKCA, as well as conformity marks
EAC,
CCC, and
CMIM. The devices comply with standards
EN/IEC 60947-5-1 and
GB/T 14048.5.
Mounting and Installation
Mounting is done by clipping onto the DIN rail on the left side of the power switch. The screw terminals at the top allow for secure and durable connections to the wiring. The wire stripping length is 10 mm. Installation must be carried out by a qualified electrician, as it involves connection to the main supply. The operating temperature is between -35 °C and +70 °C, and the storage temperature is between -40 °C and +85 °C.
Advantages in Operation
The auxiliary switch provides reliable status indication, simplifying maintenance and diagnosis of switching systems. The modular design allows for flexible expansion of existing installations. The screw terminals ensure secure connections, and compliance with standards guarantees safety and reliability in operation. Compatibility with the Acti9 family from Schneider Electric enables uniform and standardized installation in electrical distributions.