Complementary
Control type	Direct front rotary handle
Handle colour	Black
Mounting mode	Fixed
Mounting support	Rail; Plate
Upside connection	Front
Downside connection	Front
Rated duty	Uninterrupted
Intermittent duty class	Class 120 - 60 %
[Icw] rated short-time withstand current	50 kA during 0.5 s conforming to IEC 60947-3; 11 kA during 30 s conforming to IEC 60947-3; 13 kA during 20 s conforming to IEC 60947-3; 30 kA during 3 s conforming to IEC 60947-3; 50 kA during 0.8 s conforming to IEC 60947-3; 50 kA during 1 s conforming to IEC 60947-3
Mechanical durability	3000 cycles
Connection pitch	70 mm
Height	440 mm
Width	347.5 mm
Depth	227.5 mm
Net weight	35 kg
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 60947-3; IEC 60947-1
Product certifications	KEMA-KEUR
IP degree of protection	IP40 conforming to IEC 60529
IK degree of protection	IK07 conforming to EN 50102
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-50…85 °C
Main
Range	ComPact
Product name	ComPacT INS
Product or component type	Switch disconnector
Poles description	3P
Network type	AC; DC
Network frequency	50/60 Hz
[Ui] rated insulation voltage	1000 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage	12 kV
[Ith] conventional free air thermal current	2500 A at 60 °C
[Icm] rated short-circuit making capacity	105 kA switch-disconnector alone 690 V AC at 50/60 Hz; 330 kA with upstream protection circuit breaker 690 V AC at 50/60 Hz
[Ue] rated operational voltage	250 V DC; 690 V AC 50/60 Hz
Pollution degree	3
Suitability for isolation
Contact position indicator
Visible break
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	45.000 cm
Package 1 Width	62.000 cm
Package 1 Length	62.000 cm
Package 1 Weight	46.312 kg
Unit Type of Package 2	P12
Number of Units in Package 2	2
Package 2 Height	90.000 cm
Package 2 Width	80.000 cm
Package 2 Length	120.000 cm
Package 2 Weight	100.624 kg

The ComPact INS and INV switches are switch-disconnectors with rotary actuator. All ComPact INS/INV switch-disconnectors are suitable for disconnection as defined in the standards IEC 60947-1 and 3. The mechanical design of the ComPact switches ensures that the position of the actuator always reflects the position of the main switch. The disconnected position corresponds to the O (OFF) position. The operated actuator cannot indicate the OFF position when the switch is open. Locking in the OFF position is not possible when the switch is open. Utilization category AC21A, AC22A and AC23A.