Complementary
Control type	Direct front rotary handle
Handle colour	Black
Mounting mode	Fixed
Mounting support	Rail; Plate
Upside connection	Front
Downside connection	Front
Maximum power	AC-23: 400 kW at 220/240 V AC 50/60 Hz; AC-23: 710 kW at 380/400 V AC 50/60 Hz; AC-23: 800 kW at 415 V AC 50/60 Hz; AC-23: 900 kW at 500/525 V AC 50/60 Hz
Rated duty	Uninterrupted
Intermittent duty class	Class 120 - 60 %
[Icw] rated short-time withstand current	10 kA during 20 s conforming to IEC 60947-3; 20 kA during 3 s conforming to IEC 60947-3; 35 kA during 1 s conforming to IEC 60947-3; 42 kA during 0.8 s conforming to IEC 60947-3; 50 kA during 0.5 s conforming to IEC 60947-3; 8 kA during 30 s conforming to IEC 60947-3
Mechanical durability	3000 cycles
Connection pitch	70 mm
Height	300 mm
Width	340 mm
Depth	146.5 mm
Net weight	18 kg
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 60947-3; IEC 60947-1
Product certifications	KEMA-KEUR
IP degree of protection	IP40 conforming to IEC 60529
IK degree of protection	IK07 conforming to EN 50102
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-50…85 °C
Logistical informations
Country of origin	PL
Main
Range	ComPact
Product name	ComPacT INS
Product or component type	Switch disconnector
Poles description	4P
Network type	DC; AC
Network frequency	50/60 Hz
[Ui] rated insulation voltage	1000 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage	12 kV
[Ith] conventional free air thermal current	1250 A at 60 °C
[Icm] rated short-circuit making capacity	75 kA switch-disconnector alone 690 V AC at 50/60 Hz; 330 kA with upstream protection circuit breaker 690 V AC at 50/60 Hz
[Ue] rated operational voltage	690 V AC 50/60 Hz; 250 V DC
Pollution degree	3
Suitability for isolation
Contact position indicator
Visible break
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	21 cm
Package 1 Width	33.5 cm
Package 1 Length	43 cm
Package 1 Weight	18.63 kg

The ComPact INS and INV switches are switch-disconnectors with rotary actuator. All ComPact INS/INV switch-disconnectors are suitable for disconnection as defined in the standards IEC 60947-1 and 3. The mechanical design of the ComPact switches ensures that the position of the actuator always reflects the position of the main switch. The disconnected position corresponds to the O (OFF) position. The operated actuator cannot indicate the OFF position when the switch is open. Locking in the OFF position is not possible when the switch is open. Utilization category AC21A, AC22A and AC23A.