Further information for Schneider Electric 31360 disconnect switch 3P black
Complementary
Control type
Direct front rotary handle
Handle colour
Black
Mounting mode
Fixed
Mounting support
Rail; Plate
Upside connection
Front
Downside connection
Front
Maximum power
AC-23: 315 kW at 220/240 V AC 50/60 Hz; AC-23: 560 kW at 380/400 V AC 50/60 Hz; AC-23: 630 kW at 415 V AC 50/60 Hz; AC-23: 710 kW at 500/525 V AC 50/60 Hz; AC-23: 900 kW at 660/690 V AC 50/60 Hz
Rated duty
Uninterrupted
Intermittent duty class
Class 120 - 60 %
[Icw] rated short-time withstand current
10 kA during 20 s conforming to IEC 60947-3; 20 kA during 3 s conforming to IEC 60947-3; 35 kA during 1 s conforming to IEC 60947-3; 42 kA during 0.8 s conforming to IEC 60947-3; 50 kA during 0.5 s conforming to IEC 60947-3; 8 kA during 30 s conforming to IEC 60947-3
Mechanical durability
3000 cycles
Connection pitch
70 mm
Height
300 mm
Width
340 mm
Depth
146.5 mm
Net weight
14 kg
Contractual warranty
Warranty (in months)
18
Environment
Standards
IEC 60947-3; IEC 60947-1
Product certifications
KEMA-KEUR
IP degree of protection
IP40 conforming to IEC 60529
IK degree of protection
IK07 conforming to EN 50102
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-50…85 °C
Main
Range
ComPact
Product name
ComPacT INS
Product or component type
Switch disconnector
Poles description
3P
Network type
DC; AC
Network frequency
50/60 Hz
[Ui] rated insulation voltage
1000 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage
12 kV
[Ith] conventional free air thermal current
1000 A at 60 °C
[Icm] rated short-circuit making capacity
330 kA with upstream protection circuit breaker 690 V AC at 50/60 Hz; 75 kA switch-disconnector alone 690 V AC at 50/60 Hz
[Ue] rated operational voltage
250 V DC; 690 V AC 50/60 Hz
Pollution degree
3
Suitability for isolation
Contact position indicator
Visible break
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
21.000 cm
Package 1 Width
33.500 cm
Package 1 Length
36.000 cm
Package 1 Weight
15.400 kg
The ComPacT INS disconnect switch from the ComPacT series by Schneider Electric, type 31360, is a three-pole (3P) switch designed for use in industrial and commercial electrical installations. It enables safe disconnection of electrical circuits and allows isolation of power circuits in accordance with standards IEC 60947-1 and IEC 60947-3. The disconnect position corresponds to position O (OFF), and the mechanical design of the switch ensures that the position of the actuator always reflects the actual position of the main switch. This prevents incorrect operation, as the actuator cannot indicate the OFF position when the switch is open. Additionally, locking in the OFF position is not possible when the switch is open, enhancing operational safety.
Applications
The disconnect switch is designed for use in alternating current (AC) and direct current (DC) installations. It is suitable for operating voltages up to 690 V AC at 50/60 Hz and 250 V DC. The rated insulation voltage is 1000 V AC, ensuring high electrical strength. The maximum power rating is 900 kW at 660/690 V AC, with the exact power depending on the operating voltage. The usage categories AC21A, AC22A, and AC23A define the operating conditions for the switch, particularly for loads with inductive or mixed load characteristics.
Functions and Equipment in Detail
The switch features a contact position indicator that visually displays the current state of the switch, as well as a visible break that optically confirms the disconnection of the circuits. Control is via a direct front-mounted black rotary handle, ensuring clear operation. Mounting is fixed, with the holder compatible with both rail and plate mounting. Connections are located on the front side, both top and bottom, enabling flexible wiring. The pollution degree is 3, indicating suitability for environments with increased pollution risk.
Technology Explained Simply
The switch is designed for an operating environment from -25 °C to 70 °C, with storage temperature up to 85 °C. The rated short-time withstand current (Icw) is up to 50 kA for 0.5 seconds, describing the switch’s ability to withstand short-term load under short-circuit conditions. The conventional thermal current (Ith) is 1000 A at an ambient temperature of 60 °C, defining the thermal load capacity under continuous operation. The rated ultimate short-circuit making capacity (Icm) is 75 kA when used alone, and 330 kA when combined with a preceding circuit breaker. The mechanical life is 3000 cycles, indicating durability under normal operating conditions.
Compatibility and Accessories
Compatible accessories include auxiliary switches such as 29452 (1 contact, 5 A, 380/440 V AC, PLC signal) or 29450 (various variants such as 1W, 1SD, 1SDE, 1SDV). Other components include the phase separator 31315, the spacing spreader 31305 for flat connections, the long terminal cover LV433638, and the rotary drive 31288 with door coupling, specifically designed for the INS2000-2500 series. These accessories enable functional expansion and adaptation to specific requirements.
Mounting and Installation
Mounting is fixed, with rail or plate mounting options available. The connection pitch is 70 mm, enabling standardized installation. The device dimensions are 340 mm (width), 300 mm (height), and 146.5 mm (depth). The product weight is 14 kg. The protection rating IP40 corresponds to IEC 60529 and protects against contact with solid objects larger than 1 mm and against splashing water from any direction. The protection rating IK07 according to EN 50102 protects against mechanical impacts with an energy level of 0.7 J, suitable for industrial environments.
Operational Advantages
The disconnect switch offers high safety through visible break and contact position indicator. The mechanical interlock prevents incorrect operation. High thermal and electrical strength, along with long mechanical life, ensure reliable performance in continuous operation. Compatibility with various accessories allows flexible adaptation to different applications. Compliance with standards IEC 60947-1 and IEC 60947-3 ensures conformity with international standards. Certification by KEMA-KEUR confirms the product’s quality and safety.