Complementary
Fault type	General electric fault
Local signalling	ON/OFF indication for open/close; Trip indicator for relay trip indicator; Fault trip for electrical fault
Auxiliary contacts type	Low level
Mounting mode	Clip-on
[Ith] conventional free air thermal current	5 A
Minimum load	1 mA at 4 V DC
Accessory / separate part category	Spare part for Compact NS630b...1600; Spare part for Compact NS1600b...3200
Contractual warranty
Warranty (in months)	18
Logistical informations
Country of origin	CN
Main
Product or component type	Auxiliary contact
Device short name	SD; SDV; OF; SDE
Device application	Breaker status monitoring
Range compatibility	ComPact ComPact NS630b...1600; ComPact ComPact NS1600b...3200; ComPact ComPacT INS; ComPact Compact INV; ComPact ComPact NSX; EasyPact EasyPact CVS; PowerPact PowerPact Multistandard; ComPact ComPact NSX DC
Signal contacts composition	1 NO/NC
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	1.400 cm
Package 1 Width	7.800 cm
Package 1 Length	6.000 cm
Package 1 Weight	22.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	10
Package 2 Height	5.000 cm
Package 2 Width	14.500 cm
Package 2 Length	17.000 cm
Package 2 Weight	228.000 g
Unit Type of Package 3	S02
Number of Units in Package 3	100
Package 3 Height	15.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	2.500 kg

It is a simple low level auxiliary contact that provides all the different indications remotely for Compact NSX, Compact NS and PowerPact Multistandard circuit breakers. Remote status information is ON/OFF (OF), trip indication (SD) and fault trip indication (SDE) for all circuit breaker types. Remote status information for earth fault trip indication (SDV) is used for Compact NSX and PowerPact Multistandard. The contacts are installed in the device in special slots. This auxiliary contact is a changeover contact with a common connection point, 1 NO and 1 NC. The rated current is 5 A and the minimum load is 1 MA at 4 VDC for usage categories AC12/AC15/DC12/DC14. One device has 5 auxiliary switch contact types. It complies with IEC 60947-5-1.