| Complementary |
| Fault type | General electric fault |
| Local signalling | ON/OFF indication for open/close; Trip indicator for relay trip indicator; Fault trip for electrical fault |
| Auxiliary contacts type | Standard |
| Mounting mode | Clip-on |
| [Ith] conventional free air thermal current | 5 A |
| Minimum load | 100 mA at 24 V DC |
| Auxiliary connection terminal | Spring 0.5…1.5 mm² (20 AWG...16 AWG) |
| Accessory / separate part category | Spare part for Compact NS630b...1600; Spare part for Compact NS1600b...3200 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | CN |
| Main |
| Product or component type | Auxiliary contact |
| Device short name | OF; SD; SDE; SDV |
| Device application | Breaker status monitoring |
| Range compatibility | ComPact ComPact NS630b...1600; ComPact ComPact NS1600b...3200; ComPact ComPacT INS; ComPact Compact INV; ComPact ComPact NSX; EasyPact EasyPact CVS; PowerPact PowerPact Multistandard; ComPact ComPact NSX DC |
| Signal contacts composition | 1 NO/NC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1.400 cm |
| Package 1 Width | 7.000 cm |
| Package 1 Length | 7.000 cm |
| Package 1 Weight | 16.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 4.500 cm |
| Package 2 Width | 16.000 cm |
| Package 2 Length | 16.000 cm |
| Package 2 Weight | 176.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 300 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 5.590 kg |
The article 29450 from Schneider Electric is an
auxiliary contact for circuit breakers of the product families ComPacT, EasyPacT, PowerPact and ComPacT NSX DC. It serves for
monitoring the circuit breaker status and enables remote transmission of operating states such as open, closed or tripped. Compatibility includes models such as ComPacT NS630b to 1600, ComPacT NS1600b to 3200, ComPacT INS, ComPacT INV, ComPacT NSX, EasyPacT CVS, PowerPact Multistandard as well as ComPacT NSX DC. The auxiliary contact is intended as a
replacement part for the mentioned switch types and can be directly plugged on, allowing for quick installation without tools.
Applications
The auxiliary contact is used in industrial plants where remote monitoring of the switch status is required. It is suitable for applications in automation technology, where signals must be transmitted to control systems, PLC systems or monitoring units. Local signaling includes an ON/OFF indication for opening/closing, a tripping indication for relay tripping events, and a fault indication for electrical faults. These functions support process safety and facilitate diagnostics during operation.
Functions and equipment in detail
The auxiliary contact features a
composition of signal contacts consisting of one closer and one opener (1 NO/NC). This enables the simultaneous transmission of two states, for example for a switching position and a fault message. The
minimum load is 100 mA at 24 V DC, ensuring compatibility with typical control and signaling systems. The
auxiliary connection terminal is designed as a spring clamp and supports cross-sections from 0.5 to 1.5 mm² (AWG 20 to AWG 16), ensuring flexible wiring.
Technology explained simply
The auxiliary contact operates mechanically in conjunction with the main circuit breaker. When the switch moves (opening or closing), the auxiliary contact is actuated via a mechanical connection, thereby closing or opening the electrical contact accordingly. The
conventional thermal current rating (Ith) is 5 A in free air, defining the load capacity for continuous operation. The
plug-in mounting is done without tools, enabling quick and secure replacement or installation.
Compatibility and accessories
The auxiliary contact is specifically designed for the mentioned switch families. As a
replacement part for ComPacT NS630b–1600 and ComPacT NS1600b–3200, it is directly interchangeable. In Schneider Electric’s product range, there are compatible components such as auxiliary switch 29452, which is also intended for the same switch families but features a different contact configuration. Combination with circuit breakers such as C63H32D630, C25F3TM250 or C40F32D400 enables full integration into existing switchgear installations.
Mounting and installation
Mounting is done by plugging onto the designated connection point on the circuit breaker. No additional tools are required. The spring clamp ensures a secure and reliable connection. Installation typically takes place during commissioning or when replacing a defective auxiliary contact. The mechanical connection to the main device ensures precise and synchronized signal transmission.
Advantages in operation
The auxiliary contact offers reliable and low-maintenance signal transmission. The
standard types (OF, SD, SDE, SDV) allow flexible use depending on requirements.
Local signaling supports quick on-site status checks.
Plug-in mounting reduces installation time and minimizes error sources. The
thermal rating of 5 A ensures operation under normal industrial conditions. The
warranty is 18 months, highlighting the product’s reliability.