Further information for Schneider Electric 28998 disconnect switch 3p 80A
Additional features
Control type
Turn handle
Mounting mode
Fixed
Mounting bracket
35 mm symmetrical DIN rail; plate
Connection on top side
front side
Connection on underside
front side
Electrical lifetime
6000 cycles full load
Height
100 mm
Width
135 mm
Depth
62,5 mm
Product weight
0,8 kg
Contractual warranty
Warranty (in months)
18
Main features
Product series
ComPacT
Product name
INSE80
Name of disconnect switch
Interpact INSE80
Pole description
3P
Type of network
AC
Network frequency
50/60 Hz
[Ie] Rated operational current
80 A AC 50/60 Hz 600 V
[Uimp] Rated impulse voltage withstand
8 kV
[Icm] Rated short-circuit making capacity
10 kA protected by any protective device 600 V AC at 50/60 Hz; 100 kA protected by disconnect switch NSE100 - 100A 240 V AC at 50/60 Hz; 18 kA protected by disconnect switch NSE100 - 100A 600 V AC at 50/60 Hz; 50 kA with 100 A fuses of class T or RK 600 V AC at 50/60 Hz; 65 kA protected by disconnect switch NSE100 - 100A 480 V AC at 50/60 Hz
[Ue] Rated operational voltage
600 V AC 50/60 Hz
Suitability for insulation
Contact position indicator
Mounting
Standards
CSA C22.2 No. 5.2; UL 489
Product certifications
KEMA; ASEFA; ASTA
Packaging units
VPE 1 type
PCE
Number of devices per package
1
VPE 1 height
12,100 cm
VPE 1 width
15,700 cm
VPE 1 length
33,900 cm
Packaging weight (Lbs)
1,020 kg
The ComPact INS and INV switches are switch-disconnectors with rotary actuator. All ComPact INS/INV switch-disconnectors are suitable for disconnection as defined in the standards IEC 60947-1 and 3. The mechanical design of the ComPact switches ensures that the position of the actuator always reflects the position of the main switch. The disconnected position corresponds to the O (OFF) position. The operated actuator cannot indicate the OFF position when the switch is open. Locking in the OFF position is not possible when the switch is open. Utilization category AC21A, AC22A and AC23A.