Additional features
Network frequency	50/60 Hz
[Ue] Operational rated voltage	380 - 415 V AC 50/60 Hz; 500 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold	12 x inch +/-20 %
[Ics] Rated operational breaking capacity	75 kA 75 % according to EN/IEC 60947-2 - 220 - 240 V AC 50/60 Hz; 37.5 kA 75 % according to EN/IEC 60947-2 - 380 - 415 V AC 50/60 Hz; 30 kA 75 % according to EN/IEC 60947-2 - 440 V AC 50/60 Hz; 11.25 kA 75 % according to EN/IEC 60947-2 - 500 V AC 50/60 Hz; 50 kA 100 % according to EN/IEC 60947-2 - 250 V DC
[Ui] Rated insulation voltage	690 V AC 50/60 Hz complies with EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand	8 kV corresponds to EN/IEC 60947-2
Control type	Manual trip test; toggle switch
Local signalling	Trip indicator; ON/OFF indicator
Mounting mode	Plug-in
Mounting position	Vertical
Mounting bracket	35 mm symmetrical DIN rail
9-mm pitch	6
Height	103 mm
Depth	81 mm
Width	54 mm
Product weight	0,48 kg
Mechanical life	20000 cycles
Electrical lifetime	10000 cycles
Provisions for padlocks	Lockable
Description of locking options	Integrated locking
Connections - terminals	Tunnel terminals 1.5…50 mm² solid; tunnel terminals 1…35 mm² stranded
Wire stripping length	20 mm
[M] tightening torque	3,5 Nm
Earth fault protection	Separate block
Contact position indicator
Compatibility of comb rails and distribution blocks
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 NG125
Product or component type	Miniature circuit breaker (MCB)
Device short name	NG125L
Device application	Distribution
Pole description	2P
Number of protected poles	2
Neutral position	Left
[In] Rated current	20 A at 40 °C
Type of network	DC; AC
Trigger technology	Thermal-magnetic
Cam disc	D
Breaking capacity	100 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 40 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 50 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 500 V AC 50/60 Hz complies with EN/IEC 60947-2; 36 kA Icu at
Application category	Category A corresponds to IEC 60947-2
Suitability for insulation	Yes, complies with IEC 60947-2
Standards	EN/IEC 60947-2
Mounting
Degree of protection (IP)	IP20 complies with IEC 60529
Degree of protection (IK)	IK05 corresponds to EN/IEC 62262
Pollution degree	3 corresponds to IEC 60947-2
Over voltage category	IV
Drip-proof	2 corresponds to IEC 60068-1
Relative humidity	95 % at 55 °C
Operating altitude	2.000 m
Operating ambient temperature	-30…70 °C
Ambient temperature during storage	-40…70 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	8,3 cm
VPE 1 width	5,5 cm
VPE 1 length	10,8 cm
Packaging weight (Lbs)	478 g
VPE 2 type	BB1
VPE 2 quantity	6
VPE 2 height	9 cm
VPE 2 width	11,5 cm
VPE 2 length	35,6 cm
VPE 2 weight	2,948 kg
VPE 3 type	S03
VPE 3 quantity	36
VPE 3 height	30 cm
VPE 3 width	30 cm
VPE 3 length	40 cm
VPE 3 weight	18,175 kg

Circuit breaker Acti 9 NG125L, 50kA (IEC/EN 60947-2). 1-pole, nominal current 20A, D characteristic, operating voltage (Ue) 220-240V AC, insulation voltage (Ui) 690V AC. Protection of the circuit against short-circuit currents. Protection of the circuit against overload currents. Tripping is indicated by the middle position of the switch knob and by a red, mechanical display on the front of the device. Test button for checking the tripping mechanism. Feed from above or below. Snap action for low-wear switching of the contacts. Technology of the tripping unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. The NG125L circuit breaker meets the following standards - IEC/EN 60947-2.