Schneider Electric 18763, EAN: 3303430187639

Schneider Electric 18763 power circuit breaker 3-pole B 32A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric 18763 power circuit breaker 3-pole B 32A

Lieske Part No. 587674
Mfg Part No 18763
EAN-Code 3303430187639
Manufacturer Schneider Electric
Here only 403,75 EUR
480,46 EUR incl. VAT

Further information for Schneider Electric 18763 power circuit breaker 3-pole B 32A

Additional features
Network frequency50/60 Hz
Magnetic trip threshold4 x In
[Ics] Rated operational breaking capacity75 kA 75 % corresponds to EN/IEC 60947-2 - 220 - 240 V AC 50/60 Hz; 37.5 kA 75 % corresponds to EN/IEC 60947-2 - 380 - 415 V AC 50/60 Hz; 30 kA 75 % corresponds to EN/IEC 60947-2 - 440 V AC 50/60 Hz; 11.25 kA 75 % corresponds to EN/IEC 60947-2 - 500 V AC 50/60 Hz; 50 kA 100 % corresponds to EN/IEC 60947-2 - 375 V DC
[Ui] Rated insulation voltage690 V AC 50/60 Hz complies with EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand8 kV corresponds to EN/IEC 60947-2
Control typeManual trip test; toggle switch
Local signallingTrip indicator; ON/OFF indicator
Mounting modePlug-in
Mounting positionVertical
Mounting bracket35 mm symmetrical DIN rail
9-mm pitch9
Height103 mm
Depth81 mm
Width81 mm
Product weight0,72 kg
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Provisions for padlocksLockable
Description of locking optionsIntegrated locking
Connections - terminalsTunnel terminals 1.5…50 mm² solid; tunnel terminals 1…35 mm² stranded
Wire stripping length20 mm
[M] tightening torque3,5 Nm
Earth fault protectionSeparate block
Contact position indicatorJa
Compatibility of comb rails and distribution blocksJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 NG125
Product or component typeMiniature circuit breaker (MCB)
Device short nameNG125L
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current32 A at 40 °C
Type of networkAC; DC
Trigger technologyThermal-magnetic
Cam discB
Breaking capacity100 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 40 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 50 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 500 V AC 50/60 Hz complies with EN/IEC 60947-2; 36 kA Icu at
Application categoryCategory A corresponds to IEC 60947-2
Suitability for insulationYes, complies with IEC 60947-2
StandardsEN/IEC 60947-2
Mounting
Degree of protection (IP)IP20 complies with IEC 60529
Degree of protection (IK)IK05 corresponds to EN/IEC 62262
Pollution degree3 corresponds to IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude2.000 m
Operating ambient temperature-30…70 °C
Ambient temperature during storage-40…70 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height8,1 cm
VPE 1 width12,1 cm
VPE 1 length13,1 cm
Packaging weight (Lbs)756 g
VPE 2 typeS03
VPE 2 quantity18
VPE 2 height30 cm
VPE 2 width30 cm
VPE 2 length40 cm
VPE 2 weight14,095 kg
The circuit breaker Acti9 NG125L from Schneider Electric is a 3-pole switch from the Acti9 series, designed for distribution in electrical installations. It protects circuits against overload currents and short-circuit currents and is designed for operating voltages of 380 to 415 V AC. The switch features thermal-magnetic tripping technology, where the thermal component detects overloads and the magnetic component reacts to sudden short circuits. The B-characteristic ensures selective tripping during overloads, with the magnetic tripping threshold set at 4 times the rated current (4 x In). The rated current is 32 A at 40 °C, indicating the maximum current the switch can carry continuously without tripping.

Applications include electrical distribution in industrial and commercial facilities, as well as in buildings with higher electrical requirements. The switch is suitable for networks with alternating and direct voltage (AC/DC) and complies with usage category A according to IEC 60947-2, qualifying it for use in distribution systems with high short-circuit currents. The breaking capacity is 50 kA Icu at 380–415 V AC, indicating the maximum current the switch can safely interrupt. The rated service breaking capacity (Ics) is 37.5 kA (75%) for the same voltage class. The insulation voltage (Ui) is 690 V AC, indicating the maximum voltage the switch can safely isolate. The impulse voltage withstand (Uimp) is 8 kV, indicating the device’s ability to withstand short-term voltage surges.

Functions and equipment in detail include a mechanical contact position indicator, visually signaling the switch position (ON/OFF). A red tripping indicator shows when the switch has tripped. A manual tripping test allows checking the tripping function without current flow. Mounting is on a 35 mm symmetrical DIN rail in vertical mode, with the switch being snap-on. The tunnel terminals support cross-sections of 1.5 to 50 mm² for rigid conductors and 1 to 35 mm² for flexible conductors. The required wire stripping length is 20 mm, and the tightening torque for the terminals is 3.5 Nm. The integrated locking allows the switch to be locked with padlocks, which is important for safety and maintenance purposes.

Technology explained simply shows that the switch features a spring-operated switching mechanism, which reduces wear on the contacts during switching. The thermal tripping responds to continuous overloads, while the magnetic tripping activates during sudden high currents, such as short circuits. The B-characteristic is typical for applications requiring fast response to short circuits, while also allowing tolerance for short-term current surges (e.g., motor start-up). Compliance with EN/IEC 60947-2 ensures reliability and safety of the device in industrial and commercial applications.

Compatibility and accessories include the possibility to connect additional modules, such as current trip units, undervoltage trip units, residual current blocks (e.g. Vigi NG125V), or auxiliary switches. These modules extend the switch’s functionality, e.g. for selective fault detection, remote control, or additional safety features. Compatibility with comb rails and distribution blocks enables flexible integration into existing distribution systems.

Mounting and installation are performed on a 35 mm DIN rail, with the switch mounted vertically. Dimensions are 103 mm (height), 81 mm (width), and 81 mm (depth). The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles. The operating environment may have temperatures from -30 to 70 °C, with relative humidity up to 95 % at 55 °C. The operating altitude is limited to 2,000 m. The protection rating IP20 protects against finger contact and solid foreign objects, while IK05 protects against mechanical impacts such as shocks or vibrations. The overvoltage category IV and pollution degree 3 indicate use in environments with high electrical stress and contamination risks.

Operational advantages include high reliability, long service life, and easy mounting on DIN rails. The integrated locking and clear indication of switch position and tripping facilitate maintenance and safety. Compatibility with various accessory modules allows application-specific adaptation of the switch. Compliance with standards EN/IEC 60947-2 ensures safety and functionality in industrial and commercial installations. The switch is designed for use in distribution systems with high electrical requirements and offers a robust and maintenance-friendly solution for circuit protection technology.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/587674
qrcode für Schneider Electric 18763 power circuit breaker 3-pole B 32A