Complementary
Network frequency	50/60 Hz
[Ue] rated operational voltage	380...415 V AC 50/60 Hz; 125 V DC;
Magnetic tripping limit	8 x In
[Ics] rated service breaking capacity	37.5 kA 75 % conforming to EN/IEC 60947-2 - 110...130 V AC 50/60 Hz; 18.75 kA 75 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz; 4.5 kA 75 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz; 25 kA 100 % conforming to EN/IEC 60947-2 - 60 V DC; 25 kA 100 % conforming to EN/IEC 60947-2 - 125 V DC
[Ui] rated insulation voltage	690 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage	8 kV conforming to EN/IEC 60947-2
Control type	Toggle; Manual tripping test
Local signalling	ON/OFF indication; Trip indicator
Mounting mode	Clip-on
Mounting position	Vertical
Mounting support	35 mm symmetrical DIN rail
9 mm pitches	3
Height	103 mm
Depth	81 mm
Width	27 mm
Net weight	0.24 kg
Mechanical durability	20000 cycles
Electrical durability	10000 cycles
Provision for padlocking	Padlockable
Locking options description	Integrated padlocking
Connections - terminals	Tunnel type terminals1.5…50 mm² rigid; Tunnel type terminals1…35 mm² flexible
Wire stripping length	20 mm
Tightening torque	3.5 N.m
Earth-leakage protection	Without
Contact position indicator
Comb busbar and distribution block compatibility
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20 conforming to IEC 60529
IK degree of protection	IK05 conforming to EN/IEC 62262
Pollution degree	3 conforming to IEC 60947-2
Overvoltage category	IV
Tropicalisation	2 conforming to IEC 60068-1
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-30…70 °C
Ambient air temperature for storage	-40…70 °C
Logistical informations
Country of origin	FR
Main
Range	Acti9
Product name	Acti9 NG125
Product or component type	Miniature circuit-breaker
Device short name	NG125N
Device application	Distribution
Poles description	1P
Number of protected poles	1
[In] rated current	20 A at 40 °C
Network type	DC; AC
Trip unit technology	Thermal-magnetic
Curve code	C
Breaking capacity	25 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 25 kA Icu at 12 V DC conforming to EN/IEC 60947-2; 50 kA Icu at 110...130 V AC 50/60 Hz conforming to EN/IEC 60947-2; 6 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 25 kA Icu at 125 V DC conforming to EN/IEC 60947-2; 20 kA Icu at
Utilisation category	Category A conforming to IEC 60947-2
Suitability for isolation	Yes conforming to IEC 60947-2
Standards	EN/IEC 60947-2
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	3 cm
Package 1 Width	8 cm
Package 1 Length	11 cm
Package 1 Weight	244 g
Unit Type of Package 2	BB1
Number of Units in Package 2	12
Package 2 Height	9.3 cm
Package 2 Width	12.1 cm
Package 2 Length	36.2 cm
Package 2 Weight	3.018 kg
Unit Type of Package 3	S03
Number of Units in Package 3	72
Package 3 Height	30 cm
Package 3 Width	30 cm
Package 3 Length	40 cm
Package 3 Weight	18.574 kg

Circuit breaker Acti 9 C60PV-DC, 1.5kA (IEC/EN 60947-2). 2-pole, nominal current 16A, C characteristic, operating voltage (Ue) 800V DC, insulation voltage (Ui) 1000V DC. Short-circuit and overload protection. Snap action for low-wear switching of the contacts. Insulation cover moves with the device. Green stripe on the device's switch knob shows that the contacts are open. Additional auxiliary modules that can be connected in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release. Color RAL 9003. The C60PV-DC circuit breaker meets the following standards - IEC/EN 60947-2.