| Additional features |
| Thread type | M5 |
| Screw length | 60 mm |
| Bore diameter | 10 mm |
| Material | Hook: steel galvanized; Sleeve: PA (polyamide); Spring: PA (polyamide) |
| Practical load capacity | Shear: 250 N for 13-mm board (safety factor: 4.5); Pull-out load: 75 N for 13-mm board (safety factor: 6); Shear: 400 N for 2 x 13 mm boards (safety factor: 4.5); Pull-out load: 150 N for 2 x 13 mm boards (safety factor: 6) |
| Size | Hook: 10 x 18 x 31 mm |
| Length | 93 mm |
| Width | 20 mm |
| Product weight | 0,01696 kg |
| Supplied accessories | Hook |
| Main colour tone | Blue/white |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | Thorsman |
| Product or component type | Hollow wall anchor |
| Device short name | TSP |
| Device application | 3…28 mm sheet material |
| Mounting bracket | Plate material - thickness: 3…28 mm |
| Hue | Blue/white |
| Quantity per set | set of 25 |
| Mounting |
| Operating ambient temperature | -40…80 °C |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 6,000 cm |
| VPE 1 width | 9,500 cm |
| VPE 1 length | 10,000 cm |
| Packaging weight (Lbs) | 17,600 g |
The hollow wall anchor 1253004 from Schneider Electric belongs to the Thorsman series and is designed as a TSP type. It is a hollow wall anchor for mounting in sheet materials such as plasterboard with a thickness of 3 to 28 mm. The anchor is specifically designed for use in lightweight walls, where secure fastening without tools is required. The blue/white colour coding supports quick identification of the correct anchor size during work. The product is supplied in a set of 25 pieces, with each anchor including a hook made of galvanised steel.
Hollow wall anchors are fastening elements used in hollow spaces such as plasterboard to safely transfer loads. This type is designed for a drilling diameter of 10 mm and enables mounting without additional tools. The use of nylon (PA) for the guide sleeve, spring, and expansion wings ensures high corrosion resistance and mechanical stability. The hook made of galvanised steel provides additional strength and is designed for a screw length of 60 mm.
Mounting in plasterboard is the primary application area. The practical load capacity is 250 N in shear (safety factor 4.5) and 75 N in pull-out (safety factor 6) for a 13 mm plate. For two 13 mm plates, the shear load increases to 400 N (safety factor 4.5) and the pull-out load to 150 N (safety factor 6). These values are relevant for planning fastenings in indoor environments, particularly for mounting electrical installations, enclosures, or other devices.
Technology explained simply: The anchor consists of a plastic sleeve (PA sleeve) that anchors itself in the hollow space when inserted into the hole, thanks to the spring and expansion wings. The spring ensures a secure fit, while the expansion wings distribute the load across the entire wall thickness. The steel hook allows fastening of components with an eyelet or hole. The material combination of PA and galvanised steel ensures long service life even under frequent use.
Compatibility and accessories: The anchor is designed for holes with a diameter of 10 mm and is supplied with a hook. The specifications refer to mounting in plasterboard; other materials such as concrete or masonry are not intended. The temperature resistance ranges from -40 °C to +80 °C, enabling use in indoor environments and under normal ambient conditions.
Mounting and installation: Installation is tool-free. The anchor is inserted into the pre-drilled hole, where the spring and expansion wings automatically anchor in the hollow space. The hook is then hooked into the eyelet of the component to be fastened. The fastening is immediately load-bearing once the anchor is correctly positioned. The maximum length of the anchor is 93 mm, with a width of 20 mm and hook dimensions of 10 x 18 x 31 mm.
Advantages in operation: The combination of high load capacity, corrosion resistance, and tool-free installation makes the anchor particularly suitable for use in electrical and IT trades. The colour coding simplifies selecting the correct size. The materials are designed for long service life, and the safety factors ensure reliable fastening under normal loads. The operating temperature range of -40 to +80 °C covers most indoor conditions.