| Additional features |
| Practical load capacity | Shear: 1.2 kN for concrete C25 (safety factor: 4.5); Pull-out load: 0.8 kN for concrete C25 (safety factor: 6); Shear: 0.7 kN for solid brick (safety factor: 4.5); Pull-out load: 0.4 kN for solid brick (safety factor: 6); Shear: 0.25 kN for low-density concrete 500 and lightweight aggregate (safety factor: 4.5); Pull-out load: 0.1 kN for low-density concrete 500 and lightweight aggregate (safety factor: 6) |
| Hue | Brown |
| Operating ambient temperature | -50…80 °C |
| Diameter | 8 mm |
| Length | 40 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Features |
| Material | High-Density Polyethylene (HDPE) |
| Dowel diameter | 8 mm |
| Dowels quantity | 100 |
| Type | Round |
| Main features |
| Product series | Thorsman |
| Product or component type | Wall plug |
| Device short name | TP |
| Device application | Installation with low weight |
| Drill diameter | 8 mm concrete; 8 mm brick; 7 mm autoclaved aerated concrete |
| Minimum drilling depth | 45 mm |
| Screw diameter | 5…6 mm |
| Material | PEHD (high-density polyethylene) |
| Mounting |
| Quantity per set | Set of 100 |
| Sales per indivisible quantity | 10 |
| Product weight | 0,00138 kg |
| Packaging content |
| Quantity per pack | 100 pc(s) |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 1,000 cm |
| VPE 1 width | 1,000 cm |
| VPE 1 length | 4,000 cm |
| Packaging weight (Lbs) | 1,600 g |
| VPE 2 type | BB2 |
| VPE 2 quantity | 1000 |
| VPE 2 height | 22,400 cm |
| VPE 2 width | 24,000 cm |
| VPE 2 length | 13,200 cm |
| VPE 2 weight | 1,652 kg |
| Weight & dimensions |
| Anchor/dowel length | 4 cm |
| Minimum drill hole depth | 4.5 cm |
The article 1005008 from Schneider Electric is a
wall plug from the
Thorsman series, specifically designed for mounting installations with low weight. It is a
universal anchor with dimensions of 8 mm diameter and 40 mm length, supplied in a pack of 100 pieces. The anchor is made of
high-density polyethylene (HDPE), ensuring high chemical resistance and good mechanical strength. The
brown color serves as visual guidance in the
color coding system of the Thorsman series, simplifying the selection of the correct anchor size.
Applications
The anchor TP2B 8x40mm is intended for mounting applications where primarily
shear forces (shearing) occur. It is suitable for fastening in various substrates, including
concrete,
natural stone,
gas concrete,
lightweight clinker,
hollow block bricks,
hollow bricks,
solid bricks, and
hollow cavity linings. The application is particularly suited for installations that do not require high tensile forces, such as mounting ceiling-mounted lighting fixtures. For applications involving strong heat generation or high tensile loads, the use of metal anchors from the product range is recommended.
Functions and Equipment in Detail
The anchor features a
smooth surface, ensuring a secure hold in the drilled hole. The
double expansion and
depth expansion via a collar, whose inner diameter is larger at the collar than at the tip, ensure that the anchor does not rotate or sink. This design enables stable anchoring even in porous or soft substrates such as plaster or gas concrete. The
practical load capacity is 1.2 kN in shear in concrete C25 (safety factor 4.5) and 0.7 kN in solid brick (safety factor 4.5). The pull-out load is 0.8 kN in concrete C25 (safety factor 6) and 0.4 kN in solid brick (safety factor 6). In low-density materials such as concrete 500 or lightweight aggregate, the shear load is 0.25 kN (safety factor 4.5) and the pull-out load is 0.1 kN (safety factor 6).
Technology Explained Simply
The anchor is designed for a
drill diameter of 8 mm in concrete and brick, and
7 mm in autoclaved aerated concrete. The
minimum drill depth is 45 mm to ensure sufficient anchoring. The
screw diameters range from 5 to 6 mm. The material choice of
PEHD (high-density polyethylene) offers high resistance to environmental influences. The
operating ambient temperature ranges from -50 °C to +80 °C, enabling use in a wide range of indoor and outdoor applications. The
anchor length is 40 mm, providing sufficient anchoring depth in most common substrates.
Compatibility and Accessories
The anchor is designed for use with screws in the diameter range of 5 to 6 mm. It is part of the Thorsman series and can be combined with other products in this series to ensure consistent mounting in various materials. The use of metal anchors is recommended for applications with high tensile loads or strong heat generation, indicating a differentiated product selection within the program.
Installation and Mounting
Mounting is done by drilling a hole with the specified diameter (8 mm for concrete and brick, 7 mm for gas concrete) and a depth of at least 45 mm. The anchor is inserted into the hole and fastened with a suitable screw (5–6 mm). The double expansion and depth expansion ensure that the anchor tightens securely in the hole and provides stable anchoring. The smooth surface and the special shape of the collar prevent rotation or sinking during installation.
Advantages in Operation
The anchor provides reliable fastening in various substrates, especially for applications involving shear forces. The high chemical resistance of the HDPE material and the wide temperature range from -50 °C to +80 °C enable versatile use. The easy handling, clear color coding, and stable anchoring due to double expansion make the anchor a practical solution for low-weight installations. The pack of 100 pieces offers an economical packaging for professional users.