Schneider Electric 1003003, EAN: 7315881003006

Schneider Electric 1003003 wall plug without screw 100-piece set

Installation > Fixing hardware > Wall Plugs

Schneider Electric 1003003 wall plug without screw 100-piece set

Lieske Part No. 1851159
Mfg Part No 1003003
EAN-Code 7315881003006
Manufacturer Schneider Electric
Here only 4,66 EUR
5,55 EUR incl. VAT

Further information for Schneider Electric 1003003 wall plug without screw 100-piece set

Additional features
Practical load capacityPull-out load: 0.04 kN for low-density concrete 500 and lightweight aggregate (safety factor: 6); Shear: 0.6 kN for concrete C25 (safety factor: 4.5); Pull-out load: 0.4 kN for concrete C25 (safety factor: 6); Shear: 0.5 kN for solid brick (safety factor: 4.5); Pull-out load: 0.3 kN for solid brick (safety factor: 6); Shear: 0.15 kN for low-density concrete 500 and lightweight aggregate (safety factor: 4.5)
Operating ambient temperature-50…80 °C
Diameter5,5 mm
Length35 mm
Main colour toneRed
Contractual warranty
Warranty (in months)18
Main features
Product seriesThorsman
Product or component typeWall plug
Device short nameTP1
Device applicationInstallation with low weight
Drill diameter5.5 mm concrete; 5.5 mm brick; 5 mm autoclaved aerated concrete
Minimum drilling depth40 mm
Screw diameter3,5…5 mm
MaterialPEHD (high-density polyethylene)
HueRed
Mounting
Quantity per setSet of 100
Sales per indivisible quantity10
Product weight0,00059 kg
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height3,800 cm
VPE 1 width4,800 cm
VPE 1 length17,800 cm
Packaging weight (Lbs)0,800 g
VPE 2 typeBB1
VPE 2 quantity100
VPE 2 height3,900 cm
VPE 2 width18,100 cm
VPE 2 length4,900 cm
VPE 2 weight80,000 g
VPE 3 typeCAR
VPE 3 quantity1000
VPE 3 height32,100 cm
VPE 3 width20,700 cm
VPE 3 length18,900 cm
VPE 3 weight808,000 g
The article 1003003 from Schneider Electric is a wall plug of the Thorsman series, type TP1, in the colour Red. It is a friction anchor designed for securing installations with low weight. The anchor is supplied without screws and is available in a pack of 100 pieces. It is made of PEHD (high-density polyethylene) and is suitable for a variety of substrates, including concrete, natural stone, aerated concrete, lightweight clinker, hollow block bricks, hollow bricks, solid bricks, as well as cavity wall linings. The colour Red is used within the Colour Code System for easy identification of anchor size and is systematically applied to anchors and packaging.

Applications
This anchor is suitable for mounting applications with predominant shear forces. For applications involving tensile forces or high heat generation, such as securing ceiling-mounted lighting fixtures, the use of metal anchors from the product range is recommended. Possible applications include securing lightweight installations in indoor and outdoor environments, with an operating temperature range of -50 °C to +80 °C enabling use in various conditions.

Functions and Equipment in Detail
The TP1 anchor features a smooth surface ensuring a secure hold, as well as double expansion, providing high load capacity even in plaster. The construction with wings and collar ensures the anchor does not rotate or sink during installation. The internal diameter at the collar is larger than at the tip, creating depth expansion and preventing cracking in plastered or rendered walls. The hole size is 5.5 mm for concrete and brick, and 5 mm for steam-cured aerated concrete. The minimum drilling depth is 40 mm.

Technology Explained Simply
The double expansion ensures even load distribution in the substrate. The material PEHD is resistant to chemical influences and temperature fluctuations in the range of -50 °C to +80 °C. The red-marked version is part of a standardised colour code system that simplifies selecting the correct anchor size.

Compatibility and Accessories
The anchor is designed for screws with a diameter of 3.5 to 5 mm. It is suitable for use in various building materials, including concrete C25, solid brick, low-density concrete 500, and lightweight aggregate. Load capacity depends on the substrate: for concrete C25, the pull-out load is 0.4 kN (safety factor 6) and shear load is 0.5 kN (safety factor 4.5). For solid brick, shear load is 0.5 kN (safety factor 4.5) and pull-out load is 0.3 kN (safety factor 6). For low-density concrete 500 and lightweight aggregate, pull-out load is 0.04 kN (safety factor 6) and shear load is 0.15 kN (safety factor 4.5). These values refer to practical load capacity considering safety factors.

Installation and Mounting
Installation involves drilling a hole with the specified diameter (5.5 mm for concrete and brick, 5 mm for steam-cured aerated concrete) and a depth of at least 40 mm. The anchor is inserted into the hole and secured with a suitable screw (diameter 3.5–5 mm). The double expansion ensures the anchor does not rotate or sink. Depth expansion, due to the larger internal diameter at the collar, prevents cracking in plastered or rendered walls.

Operational Advantages
The anchor provides high load capacity in various building materials, especially under shear forces. The smooth surface and double expansion ensure a secure hold. Colour coding simplifies selecting the correct size. The use of PEHD ensures high resistance to temperature fluctuations and chemical influences. The winged and collared construction prevents rotation and sinking during installation. Depth expansion protects against cracking in sensitive walls.

The warranty period is 18 months. The article is supplied in a pack of 100 pieces. Packaging units include individual packaging (PCE), cartons with 100 pieces (BB1), and cartons with 1000 pieces (CAR). Exact dimensions and weights of the packaging are documented in the technical data.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1851159
qrcode für Schneider Electric 1003003 wall plug without screw 100-piece set