| Additional features |
| Practical load capacity | Shear: 0.5 kN for concrete C25 (safety factor: 4.5); Pull-out load: 0.25 kN for concrete C25 (safety factor: 6); Shear: 0.4 kN for solid brick (safety factor: 4.5); Pull-out load: 0.2 kN for solid brick (safety factor: 6); Shear: 0.1 kN for low-density concrete 500 and lightweight aggregate (safety factor: 4.5); Pull-out load: 0.04 kN for low-density concrete 500 and lightweight aggregate (safety factor: 6) |
| Hue | Yellow |
| Operating ambient temperature | -50…80 °C |
| Diameter | 5,5 mm |
| Length | 22 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | Thorsman |
| Product or component type | Wall plug |
| Device short name | TP |
| Device application | Installation with low weight |
| Drill diameter | 5.5 mm concrete; 5.5 mm brick; 5 mm autoclaved aerated concrete |
| Minimum drilling depth | 25 mm |
| Screw diameter | 3,5…5 mm |
| Material | PEHD (high-density polyethylene) |
| Mounting |
| Quantity per set | Set of 100 |
| Sales per indivisible quantity | 10 |
| Product weight | 0,00039 kg |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 0,800 cm |
| VPE 1 width | 0,800 cm |
| VPE 1 length | 2,200 cm |
| Packaging weight (Lbs) | 0,400 g |
| VPE 2 type | BB1 |
| VPE 2 quantity | 1000 |
| VPE 2 height | 6,100 cm |
| VPE 2 width | 25,300 cm |
| VPE 2 length | 18,900 cm |
| VPE 2 weight | 536,000 g |
Dowel TP1 5.5x22mm. A range of colour-coded friction dowels for all installation situations. Colour Code System - the sophisticated and protected colour code for easy selection of dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for best hold, double expansion, high load capacity even in plaster. With wings and collar. Dowel does not rotate and does not sink. Inner diameter at the collar larger than at the tip. Depth expansion. Applications: For installation situations with predominantly transverse forces. For tensile forces and when high heat is generated, e.g. for fastening lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: Concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. Material: PE-HD Temperature range: -50°C to +80°C.