| General |
| Model | IW 32 |
| Measuring range | 60 A |
| Gear ratio | 30:1 |
| Drill hole diameter | 10 mm |
| Compatibility | IMR 3, IMR F1 |
The IW 32 current transformer from Schalk is an electronic current transformer for extending the measurement range of measuring instruments from the IMR 3 and IMR F1 series. It enables the measurement of currents up to 60 amperes, extending the original measurement range of 16 amperes. The device is specifically designed for use in electrical installations where precise current measurement over a wider range is required. The current transformer is directly installed in the circuit, with the conductor passed through the central bore of the transformer to detect the current flow.
Applications
The IW 32 is suitable for use in industrial and commercial electrical installations, particularly in systems where accurate current measurement over an extended range is necessary. It is frequently used in combination with digital measuring instruments from the IMR series to ensure measurement accuracy at higher loads. Typical applications include enclosures or distributions where the power consumption of consumers or machines must be monitored.
Functions and Equipment in Detail
The current transformer operates on the principle of a through-type transformer, where the conductor to be measured is passed through a central bore in the device. The measurement is performed via a transformer that converts the primary current (up to 60 A) into a secondary, smaller current (1 A), which is then evaluated by the connected measuring instrument. The transformation ratio is 30:1, meaning that a current of 30 A in the primary circuit corresponds to 1 A in the secondary circuit. This ratio enables precise measurement without direct electrical connection to the main current circuit.
Technology Explained Simply
The IW 32 uses electromagnetic induction to detect the current in the conductor. When the conductor is passed through the bore, the flowing current generates a magnetic field that is induced in the core of the transformer. This field is converted via a transformer into a proportional, smaller current, which is then transmitted to the measuring instrument. The construction ensures high insulation between the primary and secondary circuits, increasing safety. Dimensions of 32 mm x 32 mm x 15.5 mm with a bore diameter of 10 mm allow for compact mounting in standard switchgear enclosures.
extends the measurement range of IMR 3 and IMR F1 from 16A to 60A, dimensions: 32x32x15.5 (Ø10) mm
Compatibility and Accessories
The current transformer is specifically developed for use with Schalk measuring instruments IMR 3 and IMR F1. It extends their measurement range from 16 A to 60 A, making the devices suitable for higher loads.
Mounting and Installation
Installation is performed by passing the conductor to be measured through the central bore of the transformer. The transformer is integrated into the switchgear system, with electrical connections on the secondary side connected to the measuring instrument. Installation requires no additional tools or components, as the transformer is directly integrated into the circuit.
Operational Advantages
Using the IW 32 enables precise and safe current measurement over an extended range. The separation between primary and secondary circuits increases safety, as the measuring instrument is not directly connected to the high-current circuit. The compact design and through-type principle simplify installation, especially in existing systems, where modifications can be made without major changes. Measurement accuracy is maintained within the extended range, ensuring the reliability of the measured values.