Schalk GW6009, EAN: 4046929501064

Schalk GW6009 Basic Load Resistor 230V 140/2mA

Schalk GW6009 Basic Load Resistor 230V 140/2mA

Lieske Part No. 536329
Mfg Part No GW6009
EAN-Code 4046929501064
Manufacturer Schalk
Here only 7,03 EUR
8,37 EUR incl. VAT

Further information for Schalk GW6009 Basic Load Resistor 230V 140/2mA

General
Operating voltage230 V AC
Base load current (I<sub>e</sub>)140 mA
Load current (I<sub>d</sub>)2 mA
The GW 6 basic load resistor from Schalk is a compact component for generating a minimal current draw in electrical consumers, particularly in installations with limited space. It is directly integrated into devices to ensure the necessary basic load for the correct operation of control and monitoring systems. The resistor is designed for operation at a voltage of 230 V AC and is suitable for applications in building automation, especially for blind and garage door drives, where a constant current draw is required for communication with control devices.

Applications
The GW 6 is used in consumers that require a minimal current draw to be detected by control or monitoring systems. This applies, for example, to blind motors or garage door drives controlled via a central unit. The integrated basic load enables continuous detection of the device in the network without requiring additional components or external power supplies. The compact design with dimensions 8 x 5 x 45 mm makes it particularly suitable for installation in tight spaces.

Functions and Equipment in Detail
The GW 6 basic load resistor generates a defined current draw of 140 mA (le) at a load current of 2 mA (ld). These values ensure that the device is recognized as present in the network without significantly increasing the total current draw of the consumer. The current values are relevant for communication with control devices and monitoring systems that respond to a minimal load to monitor the operating status of the device. The size is designed to allow direct integration into devices without additional mounting effort.

Technology Explained Simply
A basic load resistor such as the GW 6 is used to generate a small, constant current draw necessary for device detection in an electrical system. Without such a load, a device in standby mode or switched off could be interpreted by a control device as switched off" or "not present". The resistor ensures that the device is always recognized as "present, even when not actively operating. The specification 140/2 mA refers to the load current values, where 140 mA represents the effective load (le) and 2 mA represents the load current (ld). These values are relevant for compatibility with specific control devices.

Compatibility and Accessories
The GW 6 is compatible with control and monitoring systems requiring a minimal current draw of 140 mA (le) and 2 mA (ld). Suitable accessories include the network field disconnection switch NFA 63 (type NFA639), designed for disconnecting network fields at 230 V AC. This switch can be used in combination with the GW 6 to selectively control the power supply to consumers, for example in building automation. The combination enables precise control of blind or garage door drives.

Mounting and Installation
The GW 6 basic load resistor is designed for direct installation into consumers. Mounting is done by mechanical fastening within the device, with dimensions 8 x 5 x 45 mm enabling easy integration into compact assemblies. No additional mounting aids or tools are required. The electrical connection is made via the designated connection points, designed for connection to the internal circuit of the device. Installation is carried out during device manufacturing or during maintenance.

Operational Advantages
The use of the GW 6 enables reliable detection of consumers in control and monitoring systems without requiring additional components or external power supplies. The compact design reduces space requirements within the device, which is particularly advantageous in tight spaces. The defined current draw of 140/2 mA ensures compatibility with common control devices. The direct installation solution reduces the number of required components and simplifies mounting within the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/536329
qrcode für Schalk GW6009 Basic Load Resistor 230V 140/2mA