| General |
| Operating voltage | 3 V DC |
| Number of channels | 1 |
| Transmission range | at least 50 m |
| Compatibility | FE3-series, FD3-series, FV2 R |
| Mounting method | Screws, adhesive pads |
The FS3 A1 surface touch wireless transmitter from Schalk is a 1-channel wireless transmitter for home automation, used within the FS3/FE3 wireless system. It is designed for wireless control of wireless receivers, wireless dimmers, and repeaters within the system. The device is finished in white and can be mounted on various surfaces, either by screw fixation or using the included adhesive pads. The mounting is flexible and allows installation on walls, furniture, or other suitable substrates.
Applications
The FS3 A1 is designed for use in residential and commercial buildings where wireless control of lighting and other electrical devices via radio is required. It is particularly suitable for rooms where conventional switch installation is not possible or desired, such as during renovations, temporary setups, or when integrating into existing electrical installations without rewiring. Compatibility with the FE3 series and FD3 series enables control of light switches and dimming functions.
Functions and Equipment in Detail
The surface touch wireless transmitter features a single channel designed for transmitting a switching command. The transmitter's output power enables a free-space range of at least 50 meters, ensuring reliable wireless communication in larger rooms or across multiple walls. The device is housed in a compact, square enclosure with dimensions 80 x 80 x 15 mm, designed to blend visually into the environment.
Technology Explained Simply
The transmitter operates within the FS3/FE3 wireless network, which uses a specific frequency to minimize interference with other wireless devices. The wireless transmission occurs without additional network power supply, as the device is battery-operated. The range of at least 50 meters under free-space conditions is typical for such systems and may vary depending on environmental conditions such as walls, furniture, or other obstacles. The use of adhesive pads allows for quick and damage-free mounting without drilling.
Compatibility and Accessories
The FS3 A1 is fully compatible with receivers from the FE3 series, wireless dimmers from the FD3 series, and the repeater FV2 R. These devices can be controlled via the surface touch transmitter, enabling a flexible and expandable home automation solution.
Mounting and Installation
Installation is performed either by screw fixation or using the included adhesive pads. Mounting is simple and does not require special tools. The positioning should be chosen to ensure sufficient wireless range to the receivers. The surface must be clean and dry to ensure secure adhesion of the adhesive pads.
Operational Advantages
Using the FS3 A1 enables flexible and quick installation without electrical wiring. Wireless control offers high flexibility in switch placement and allows control of multiple devices via a single control element. Compatibility with other devices in the FS3/FE3 system allows for step-by-step expansion of the installation without technical limitations. The operating voltage of 3 V DC ensures low energy consumption and long battery life. Batteries are not included in the delivery scope.