| General |
| Operating voltage | 230 V AC |
| Nominal current | 16 A |
| Switching time (tv) | 15 ms |
| Mounting dimensions | 18x55 mm |
| Application type | rack mounting |
The EBN 2 inrush current limiter from Schalk is a plug-in device designed to protect relay contacts from damage caused by high inrush current peaks. It is used in industrial and commercial installations where electronic ballasts, fluorescent lamps, energy-saving lamps, or compensation capacitors can generate current peaks exceeding 100 A upon switching on. These current peaks often cause welding of relay contacts, leading to failures and increased maintenance effort. The EBN 2 is installed in the circuit after the vulnerable contacts to reduce the current peaks to a non-critical level, thereby extending the service life of the contacts.
Applications
The EBN 2 is intended for applications in lighting technology, particularly for controlling fluorescent and energy-saving lamps, as well as electronic ballasts. It is also suitable for use when capacitors for reactive power compensation are switched on, as these also generate high current peaks during activation. Its installation function in enclosures and control systems makes it a standard component in industrial electrical engineering.
Functions and Equipment in Detail
The limiter operates using an electronic circuit that controls the current rise during switching on. It reduces the current peak to a value that is safe for relay contacts. The circuit is designed for an operating voltage of 230 V AC and supports a rated current of 16 A. The mounting dimensions are 18 mm width and 55 mm height, corresponding to the standard size for plug-in installation in enclosures. The switching time (tv) is 15 ms, indicating the response speed of the device.
Technology Explained Simply
The EBN 2 uses an electronic control that limits current flow during switching on without affecting the operation of the connected load. The limitation is achieved through a time-controlled current increase, ensuring the contacts are not overloaded. The circuit is designed to allow full current flow after the switching process, enabling the connected load to operate normally. The operating voltage of 230 V AC is suitable for use in standard mains voltage installations in Europe and other regions with the same voltage.
Compatibility and Accessories
The EBN 2 is designed for use in enclosures with standard plug-in rails. It is compatible with relays and contactors commonly used in industrial electrical engineering. The mounting dimensions of 18 mm width and 55 mm height match the standard format for plug-in devices.
Mounting and Installation
Installation is carried out in standard control panels or enclosures with plug-in guides. The device is inserted into the circuit after the relay or contactor to protect the contacts. The mounting dimensions of 18 mm width and 55 mm height allow for easy integration into existing circuits. Electrical connections are made via the terminal clamps, which are rated for an operating voltage of 230 V AC and a rated current of 16 A.
Advantages in Operation
By reducing inrush current peaks, the service life of relay contacts is significantly extended. This leads to reduced failures and maintenance effort. The ease of installation and standard dimensions facilitate integration into existing systems. The circuit is robust and designed for use in industrial environments, requiring no additional protective measures.