Schalk ATRU29, EAN: 4046929601160

Schalk ATRU29 Isolation Relay 230VAC/24VDC

Installation > Modular devices / equipment installation > Impulse switch / relay

Schalk ATRU29 Isolation Relay 230VAC/24VDC

Lieske Part No. 607743
Mfg Part No ATRU29
EAN-Code 4046929601160
Manufacturer Schalk
Here only 37,90 EUR
45,10 EUR incl. VAT

Further information for Schalk ATRU29 Isolation Relay 230VAC/24VDC

General
Operating voltage230 V AC
Control voltage24 V DC PELV
Power consumption1 W
Switching current10 A
Contact typechangeover contact
The Schalk ATR U2 (manufacturer part number ATRU29) is an active isolation relay for use in installation technology, particularly in modular installation devices. It is designed to control consumers connected to mains voltage (230 V AC) via low-voltage contacts, with the required control voltage (24 V DC PELV) generated internally. This eliminates the need for a separate power supply to energize the relay coil. The device is compact, with dimensions of 43 mm × 43 mm × 18.5 mm, and is suitable for installation in standard installation switchboards. It features a 10 A changeover contact, suitable for a wide range of applications in building and plant control systems.

Applications

The ATR U2 is commonly used to ensure supply air monitoring for exhaust fans in enclosed rooms. In combination with the magnetic contact MKW 1, for example, it can monitor the supply air during exhaust fan operation and automatically switch off the fan if insufficient supply air is available. This often fulfills required safety regulations in building and sanitary engineering. Additionally, due to its 10 A changeover contact, the relay is versatile and can be used for controlling lighting, heating, or other electrical devices that are to be operated via low-voltage contacts.

Functions and Features in Detail

The device operates as an active isolation relay, enabling control via low voltage (24 V DC PELV) while switching occurs at mains voltage (230 V AC). The internal voltage generation ensures no additional power supply is required for the relay coil. The changeover contact allows switching of loads up to 10 A at 230 V AC, which is sufficient for many typical applications in electrical installation. The design is intended for installation in standard installation switchboards, with dimensions of 43 mm × 43 mm × 18.5 mm conforming to common standards.

Technology Explained Simply

The ATR U2 integrates a power supply that converts mains voltage (230 V AC) into a safe control voltage of 24 V DC PELV (Potentialfreie Erde, Leitungsspannung). This voltage is used to energize the relay coil, enabling control via low-voltage contacts (e.g., from sensors or switches). The relay contact then switches the mains voltage to the connected consumer. The designation PELV (Potentialfreie Erde, Leitungsspannung) means that the control voltage is galvanically isolated from the mains, making it safe for control via sensors. The power consumption is 1 W at 230 V AC.

Compatibility and Accessories

The ATR U2 is often used in combination with the magnetic contact MKW 1 to implement supply air monitoring for exhaust fans. The supply and exhaust air set ZAS K2, consisting of ATRU2 and MKW1, is offered as suitable accessory. This combination enables simple and reliable monitoring of supply air in rooms equipped with exhaust fans.

Mounting and Installation

The device is designed for installation in standard installation switchboards. The dimensions of 43 mm × 43 mm × 18.5 mm correspond to the common format for modular installation devices. Mounting typically takes place in an enclosure or distribution box, with electrical connections made to mains voltage (230 V AC) and the control circuit (24 V DC PELV). Wiring is carried out according to electrical schematics, ensuring galvanic isolation between the control and load circuits.

Operational Advantages

The internal voltage generation eliminates the need for a separate power supply, simplifying installation and reducing the number of components. The galvanic isolation between control and load circuits increases safety, especially when controlling via sensors or switches. The 10 A changeover contact allows control of a wide range of consumers, making the device flexible for various application scenarios. The compact design facilitates installation in limited space within installation switchboards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/607743
qrcode für Schalk ATRU29 Isolation Relay 230VAC/24VDC