Rutenbeck 40100014, EAN: 4043921050651

Rutenbeck 40100014 Strain Relief Clamp 8.5-13.5 mm

Installation > Fixing hardware > Screw

Rutenbeck 40100014 Strain Relief Clamp 8.5-13.5 mm

Lieske Part No. 618475
Mfg Part No 40100014
EAN-Code 4043921050651
Manufacturer Rutenbeck
Here only 17,95 EUR
21,36 EUR incl. VAT

Further information for Rutenbeck 40100014 Strain Relief Clamp 8.5-13.5 mm

General
Degree of protectionHot dip galvanized
Chucking range8.5 to 13.5 mm Ø
Maximum pull tension3,5 kN
Hook diameter26 mm
Housing materialsteel sheet
ApplicationSelf-supporting aerial cables
The Rutenbeck cable clamp AKL 802 S is a fastening element for self-supporting aerial cables in the field of installation technology. It is designed for secure and load-bearing fastening of cables with a diameter between 8.5 and 13.5 mm to masts or other support structures. The housing is made of hot-dip galvanized steel sheet, ensuring high corrosion resistance and durability even under weather influences. The clamping jaws and guide clips are made of glass-fiber-reinforced polyamide (PA) in black, providing high mechanical strength and resistance to wear.

Cable clamp

The clamp is specifically designed for fastening self-supporting aerial cables used in telecommunications, power supply, or network infrastructure. The construction enables secure and long-lasting anchoring under tensile load, with a maximum tensile load capacity of 3.5 kN. This value represents the upper load limit that the clamp can safely transmit without damage or failure.

Applications

The AKL 802 S is typically used outdoors, where cables must be fastened to masts, posts, or other support structures. It is suitable for applications in telecommunications, power supply networks, or the installation of transmission lines. The hot-dip galvanized surface of the housing provides high protection against corrosion, which is particularly advantageous in humid or saline environments.

Functions and equipment in detail

The clamp features a clamping range of 8.5 to 13.5 mm Ø, covering a wide range of cable diameters. The clamping jaws made of glass-fiber-reinforced PA ensure secure and even force distribution on the cable, preventing damage to the cable sheath. The guide clips support correct cable positioning and prevent shifting under load. The hook diameter is 26 mm, enabling installation on standard hooks or fastening elements.

Technology explained simply

The use of hot-dip galvanized steel sheet for the housing provides high corrosion protection, as the zinc coating protects the underlying steel structure from oxidation. The glass-fiber-reinforced PA components are particularly resistant to mechanical stress and temperature fluctuations. The maximum tensile load capacity of 3.5 kN indicates the maximum force the clamp can safely transmit without structural damage. This specification is crucial for planning and dimensioning cable routes.

Compatibility and accessories

The cable clamp is designed for self-supporting aerial cables, which typically consist of a messenger wire and an integrated cable. The clamp is compatible with standard hooks with a diameter of 26 mm.

Installation and mounting

Installation is performed by fastening to a suitable carrier, such as a mast or post, with the clamp suspended over a hook with a diameter of 26 mm. The cable is inserted into the clamping jaws and positioned using the guide clips. The clamp is then secured, ensuring the maximum tensile load capacity of 3.5 kN is not exceeded. Installation requires no additional tools or components beyond those already part of the clamp.

Operational advantages

The combination of hot-dip galvanized steel sheet and glass-fiber-reinforced PA ensures high mechanical strength and longevity. The clamp is maintenance-free and requires no regular inspections, provided the load limit is not exceeded. The simple installation and universal applicability for cables with diameters from 8.5 to 13.5 mm make the AKL 802 S a reliable component in installation technology.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/618475
qrcode für Rutenbeck 40100014 Strain Relief Clamp 8.5-13.5 mm