Cat.6A iso junction box, shielded, 2-way, flush-mounted, break-off support ring for bridge version, pure white (similar to RAL 9010), - for use in 10 Gigabit Ethernet networks (transmission bandwidth 500 MHz), - closed zinc die-cast housing, - variable cable feed (+/-30°), - 360° shielding and strain relief in one step, - additional earthing option via flat plug connector, - quick installation using LSA contacts, - break-off support ring for bridge version, - snap-in quick-assembly cover, - RJ45 plug openings inclined downwards, - color code T568A and T568B according to TIA / EIA-568-B.2, - UPOE-compliant, - HDBaseT-compliant, - suitable for Cat.6 and Cat.7 cables (Ø 6-10 mm), - LSA terminals for a Conductor 0.4-0.63 mm Ø, AW 26-22, re-wirable > 50 times, - suitable for PoE++ / 4PPoE according to IEEE 802.3bt, - suitable for UAE design covers of the switch industry (Berker, Busch-Jaeger, GIRA, Jung, Merten etc.), - in accordance with the following standard requirements:, - ISO/IEC 11 801, Cat.6A, shielded, - DIN EN 50173-1, Cat.6A, shielded, - ANSI TIA/EIA-568-C.2, Category 6A, - DIN EN 60603-7-51, 500 MHz, shielded, - service life > 750 mating cycles, - RJ11/12 mismating-proof, - GHMT counter-certified