General
Material	steel sheet
Colour	RAL 7035
Scope of delivery	1 frame, 2 front/rear panels, including mounting hardware for cabinet installation
Height	200 mm
Suitable for	Cabinet type: VX, TS, VX SE, width: = 600 mm, depth: = 600 mm
Type rating according to UL 50E	Type 1, Type 12
PCF/VE (Cradle-to-Gate)	48.2 kg CO2 eq (Cat B)
Note on PCF class	Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared

The Rittal cable routing space is a modular component for the structured routing and guidance of cables within enclosures. It is specifically designed for integration into enclosure housings of types VX, TS and VX SE, which have a width and depth of 600 mm each. With a height of 200 mm, it provides a defined area for organizing and guiding cables, particularly in the lower section of the enclosure, where cable connections and termination points are often concentrated. The product is made of sheet steel and is painted in RAL 7035, a gray-black tone, ensuring visual harmony with standard enclosure housings. The integrated system perforation allows for flexible and individual mounting of components without requiring additional drilling.

Cable routing space serves as a structured solution for cable routing and distribution within enclosures. It is typically installed in the lower section of the enclosure to route cables from the rear wall or from devices to connection points. The integrated system perforation allows for the mounting of sockets, cable tie holders, or other accessories directly onto the routing space, increasing flexibility in planning and installation. The specified dimensions of 600 mm width and depth fit exactly to the standard enclosure sizes of the Rittal series, enabling direct mounting without additional modifications.

Sheet steel as the material provides sufficient mechanical stability and resistance to mechanical stress during operation. The surface is painted in RAL 7035, providing uniform coloration and a certain level of corrosion protection. The use of sheet steel is typical for industrial enclosure components, as it offers a balanced combination of strength, workability, and cost efficiency. The RAL 7035 paint finish is a standard color in electrical and automation technology, integrating well into industrial environments.

Type rating according to UL 50E is specified as Type 1 and Type 12. Type 1 refers to protection against solid foreign objects and splashing water, intended for indoor use. Type 12 extends this protection to include coverage against falling water and splashing water from all directions, representing a higher protection class for use in industrial environments. This certification is relevant for compliance with safety and protection requirements in electrical engineering, particularly in regions where UL certifications are required.

Compatibility is limited to housing types VX, TS and VX SE, which have a width and depth of 600 mm each. The routing space is not intended for other enclosure sizes or types, as the dimensions and mounting points are specifically designed for these housings. Mounting is done using included fastening material intended for attachment to enclosure walls. The specified dimensions of 200 mm height and 600 mm width/depth ensure a precise fit, enabling secure and stable mounting.

Scope of delivery includes a frame, two panels (front and rear), and the necessary fastening material for mounting to the enclosure. The panels serve to shield and secure the cable routing, ensuring a proper and safe installation. The fastening material is designed for mounting to standard enclosure walls and enables quick and secure installation without additional tools or materials.

Operational benefits lie in structured cable routing, which enables better visibility, maintainability, and expandability of the enclosure. The integrated system perforation reduces the need for additional drilling and simplifies the mounting of accessories. The use of sheet steel in RAL 7035 ensures long service life and visual uniformity within the enclosure. The UL certification Type 1 and Type 12 ensures compliance with safety standards, particularly in international projects.

Mounting and installation are performed by securing the frame to the enclosure walls using the included material. The panels are attached to the front and rear to protect and organize the cable routing. The integrated system perforation allows for flexible mounting of additional components without requiring additional drilling. Installation is done without additional tools, as the fastening material is designed for standard enclosure mounting.

PCF value (Cradle-to-Gate) is 48.2 kg CO2 eq per packaging unit and is classified in category B. This value is approximately calculated based on product weight and self-declared. It serves as a reference for the environmental impact of the product, without claiming to be a complete life cycle analysis. Category B indicates that the value is based on a simplified calculation that does not fully capture all production and transport phases.