Rittal 9888560, EAN: 4028177981942

Rittal 9888560 CS 9888560 outdoor enclosure 800x1800x800 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 9888560 CS 9888560 outdoor enclosure 800x1800x800 mm

Lieske Part No. 603677
Mfg Part No 9888560
EAN-Code 4028177981942
Manufacturer Rittal
Here only 3.172,85 EUR
3.775,69 EUR incl. VAT

Further information for Rittal 9888560 CS 9888560 outdoor enclosure 800x1800x800 mm

General
ModelWith cutout for outdoor climate unit 2 - 5 kW
MaterialHousing frame: stainless steel 1.4301 (AISI 304), flat parts and base panels: aluminium, AlMg3, rain hood: aluminium
Surface protectionPowder-coated, UV-resistant pure polyester
ColourRAL 7035
Scope of deliveryDouble-walled outdoor housing, fully pre-assembled, cabinet frame with 25 mm system perforation in roof and base frames as well as vertical profiles with 2 mounting levels, front door with door latch, swing handle and profile half-cylinder, lock BJ20027, left and right side walls, rear wall, rain roof, base with screwed flange plates and screwed front and rear panels
Width800 mm
Height1.800 mm
Depth800 mm
Degree of protection IP according to IEC 60 529IP 55
NEMA degree of protectionNEMA 3R, NEMA 12
IK codeIK10
NoteAll flat parts doubled and grounded (outer wall to inner wall), CS Toptec is the basis for project solutions in the outdoor sector. These can be requested under these order numbers: For single installations: 9774.099, for row mounting: 9774.005
Note on part numberTo close the opening, an air conditioning unit is required
Base materialAluminium
The Rittal CS 9888560 is a double-walled outdoor enclosure of the CS Toptec series, designed for outdoor use. It has dimensions of width 800 mm, height 1,800 mm, and depth 800 mm, and is specifically designed for mounting outdoor climate units with a power rating of 2 to 5 kW. The version with an opening allows integration of a cooling unit, with the opening requiring a corresponding climate unit for sealing. The enclosure is fully pre-assembled and features a TS 8 frame with 25 mm system spacing in the roof and base frames as well as in the vertical profiles, providing two mounting planes for internal installation.

Applications
This enclosure is designed for use in industrial and technical outdoor installations where high mechanical and climatic resistance is required. It is suitable for applications in energy supply, process automation, or telecommunications, where control cabinets must be installed outdoors. The double-walled construction with doubled sheet metal parts (outer wall on inner wall) prevents air short circuits and ensures efficient heat dissipation. The integrated door with door latch, swing handle, and half cylinder lock with BJ20027 locking mechanism ensures secure access.

Functions and Equipment in Detail
The enclosure consists of a frame made of stainless steel 1.4301 (AISI 304), while the sheet metal parts, plinth trim panels, and rain roof are made of aluminium AlMg3. The surface is powder-coated with UV-resistant pure polyester in the colour RAL 7035. The front door is equipped with a 4-point locking system, ensuring secure closure. The side walls, rear wall, and door are fully doubled outward and earthed, enhancing electrical safety. The rain roof overhangs all sides to divert precipitation, and the plinth features bolted gland plates as well as bolted front and rear trim panels.

Technology Explained Simply
The protection rating IP 55 according to IEC 60 529 protects the enclosure against dust and splashing water, making it suitable for outdoor use. The protection ratings NEMA 3R and NEMA 12 complement the protection categories and confirm suitability for humid and dusty environments. The IK code IK10 guarantees high mechanical protection against impacts. The double-walled construction with earthed sheet metal parts ensures thermal and electrical insulation, stabilising the internal temperature and minimising the risk of short circuits. The 100 mm high transport plinth enables safe transportation and installation.

Compatibility and Accessories
The enclosure is equipped with an opening for outdoor climate units in the power range of 2 to 5 kW. Compatible cooling units include, for example, models SK 3489.340 (4550 W), SK 3488.340 (3700 W), SK 3486.330 (2000 W), and SK 3487.330 (2500 W) from the Blue e+ series. Additionally, thermostats, hygrostats, and TS system chassis for internal and external mounting levels can be used to optimise climate control and internal installation. A concrete plinth (CS 9765183) or plastic gland plates (e.g. 2562300) can be added for mounting and stabilisation.

Installation and Mounting
The enclosure is fully pre-assembled and can be installed directly at the site of use. The 25 mm system spacing in the TS 8 frame allows flexible mounting of enclosures, devices, and cable ducts. The bolted gland plates on the plinth facilitate fastening to the base. The pre-assembled door with swing handle and half cylinder lock ensures secure and convenient access. The integrated door latch prevents unintended opening.

Operational Advantages
The double-walled construction with earthed sheet metal parts ensures high mechanical stability and thermal insulation. The protection ratings IP 55, NEMA 3R, and NEMA 12, along with the IK code IK10, ensure reliable operation under harsh environmental conditions. The pre-assembled design reduces installation time on site. The integrated door with 4-point locking system and half cylinder lock offers a high security standard. The enclosure is designed as a base for project solutions in outdoor applications and can be extended for single installations (order number 9774.099) or baying (order number 9774.005).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/603677
qrcode für Rittal 9888560 CS 9888560 outdoor enclosure 800x1800x800 mm