| General |
| Model | Without breakout |
| Material | Housing frame: stainless steel 1.4301 (AISI 304), flat parts and base panels: aluminium, AlMg3, rain hood: aluminium |
| Surface protection | Powder-coated, UV-resistant pure polyester |
| Colour | RAL 7035 |
| Scope of delivery | Double-walled outdoor housing, fully pre-assembled, cabinet frame with 25 mm system perforation in roof and base frames as well as vertical profiles with 2 mounting levels, front door with door latch, swing handle and profile half-cylinder, lock BJ20027, left and right side walls, rear wall, rain roof, base with screwed flange plates and screwed front and rear panels |
| Width | 800 mm |
| Height | 1.800 mm |
| Depth | 800 mm |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| NEMA degree of protection | NEMA 3R, NEMA 12 |
| IK code | IK10 |
| Note | All flat parts doubled and grounded (outer wall to inner wall), CS Toptec is the basis for project solutions in the outdoor sector. These can be requested under these order numbers: For single installations: 9774.099, for row mounting: 9774.005 |
| Base material | Aluminium |
The Rittal CS 9888500 is a double-walled outdoor enclosure from the CS Toptec series, designed for outdoor use. It features dimensions of width 800 mm, height 1,800 mm, and depth 800 mm, and is designed as a closed enclosure. The enclosure is delivered fully pre-assembled and includes a TS 8 frame with 25 mm system spacing in the roof and base frames as well as in the vertical profiles, providing two mounting planes for internal installation. The front door is equipped with a door latch, a swing lever handle, and a half cylinder connected to the lock BJ20027. The side panels, rear panel, and door are fully double-walled on the outside, achieving thermal separation between the outer and inner walls. All flat parts are earthed, with the outer wall earthed to the inner wall, ensuring a secure electrical connection.
Applications
The enclosure is designed for outdoor use, where it must provide protection against weather influences such as rain, dust, and mechanical impacts. The protection rating IP 55 according to IEC 60 529 protects against dust and splashing water from any direction, making it suitable for use in industrial outdoor installations. The protection ratings NEMA 3R and NEMA 12 complement the protection functions and cover requirements according to North American standards. The IK code IK10 provides high protection against mechanical impacts, such as shocks or vibrations. The enclosure is equipped with a 100 mm high transport plinth, enabling secure fastening and mounting. The rain roof overhangs all sides, ensuring effective protection against precipitation.
Functions and Equipment in Detail
The enclosure consists of a frame made of stainless steel 1.4301 (AISI 304), ensuring high corrosion resistance. The flat parts, including side panels, rear panel, door, and plinth trim panels, are made of aluminium AlMg3. The rain roof is also made of aluminium. The surface is powder-coated with UV-resistant pure polyester in the colour RAL 7035, ensuring a durable and weather-resistant coating. The pre-assembled version includes all necessary components: front door with 4-point lock, swing lever handle, half cylinder, lock BJ20027, side panels, rear panel, rain roof, and plinth with screwed gland plates as well as screwed trim panels at the front and rear. The gland plates have dimensions of 340x150 mm and serve for secure fastening of the enclosure.
Technology Explained Simply
The double-walled construction ensures thermal separation between the interior and the outside environment, maintaining a stable internal temperature. The double-walled flat parts are earthed, ensuring a secure electrical connection and protection against electrostatic discharges. The 25 mm system spacing in the TS 8 frame allows flexible mounting of assemblies and components. The protection rating IP 55 means the enclosure is protected against dust and splashing water, making it suitable for use in humid or dusty environments. The IK code IK10 protects against mechanical impacts, such as shocks or vibrations, which may occur in industrial operations.
Compatibility and Accessories
The enclosure is designed as a base for project solutions in outdoor environments. It can be combined with various accessories to meet specific requirements. These include, for example, thermostats, hygrostats, enclosure heaters with fans, TS system chassis for inner and outer mounting planes, and concrete plinths. The CS Toptec series also offers baying solutions, which can be requested under order numbers 9774.099 (single installation) and 9774.005 (baying). The gland plates and trim panels are included in the delivery scope and enable secure fastening of the enclosure.
Mounting and Installation
The enclosure is delivered fully pre-assembled, simplifying on-site installation. The pre-assembled gland plates and trim panels allow secure fastening at the desired location. The 25 mm system spacing in the TS 8 frame offers flexible mounting of assemblies and components. The swing lever handles and the lock BJ20027 ensure secure and convenient door operation. The double-walled construction and double-walled flat parts facilitate installation and ensure a stable and secure setup.
Advantages in Operation
The enclosure provides high protection against weather influences and mechanical impacts, ensuring a long service life and low maintenance frequency. The double-walled construction maintains a stable internal temperature, increasing the reliability of the electronic components installed inside. The pre-assembled version reduces on-site installation time and minimizes error sources. The use of stainless steel and aluminium ensures high corrosion resistance, which is particularly advantageous in outdoor environments. The UV-resistant powder coating in RAL 7035 ensures a durable and weather-resistant surface.