| General |
| Model | Without breakout |
| Material | Housing frame: stainless steel 1.4301 (AISI 304), flat parts and base panels: aluminium, AlMg3, rain hood: aluminium |
| Surface protection | Powder-coated, UV-resistant pure polyester |
| Colour | RAL 7035 |
| Scope of delivery | Double-walled outdoor housing, fully pre-assembled, cabinet frame with 25 mm system perforation in roof and base frames as well as vertical profiles with 2 mounting levels, front door with door latch, swing handle and profile half-cylinder, lock BJ20027, left and right side walls, rear wall, rain roof, base with screwed flange plates and screwed front and rear panels |
| Width | 600 mm |
| Height | 1.800 mm |
| Depth | 600 mm |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| NEMA degree of protection | NEMA 3R, NEMA 12 |
| IK code | IK10 |
| Note | All flat parts doubled and grounded (outer wall to inner wall), CS Toptec is the basis for project solutions in the outdoor sector. These can be requested under these order numbers: For single installations: 9774.099, for row mounting: 9774.005 |
| Base material | Aluminium |
The Rittal CS 9774510 is a double-walled outdoor enclosure from the CS Toptec series, designed for outdoor use. It features dimensions of width 600 mm, height 1,800 mm, and depth 600 mm, and is designed as a closed enclosure. The enclosure is delivered fully pre-assembled and includes a TS 8 frame with 25 mm system spacing in the roof and base frames as well as in the vertical profiles, providing two mounting planes for internal installation. The front door is equipped with a door latch, a swing handle, and a half cylinder compatible with the lock BJ20027. The side panels, rear panel, and door are fully double-walled on the outside, achieving thermal separation between the outer and inner walls. All flat parts are earthed, with the outer wall earthed to the inner wall, ensuring a secure electrical connection.
Applications
This enclosure is designed for outdoor use and is suitable for applications requiring protection against weather influences, dust, and mechanical impacts. The protection rating IP 55 according to IEC 60 529 ensures protection against dust and splashing water from all directions. The NEMA protection ratings NEMA 3R and NEMA 12 complement the protection functions, with NEMA 3R providing protection against rain, sunlight, and falling dirt, and NEMA 12 offering protection against dusty and splashing water environments. The IK code IK10 guarantees high protection against mechanical impacts, such as shocks or vibrations. The enclosure is equipped with a 100 mm high transport plinth for stable placement and features an all-around overhanging rain roof that deflects precipitation.
Functions and Equipment in Detail
The enclosure consists of a frame made of stainless steel 1.4301 (AISI 304), ensuring high corrosion resistance. The flat parts and plinth trim panels are made of aluminium AlMg3, enabling good heat dissipation and lightweight construction. The rain roof is also made of aluminium. The surface is powder-coated with UV-resistant pure polyester in the colour RAL 7035, providing a durable and weather-resistant coating. The pre-assembled version includes the front door with door latch, swing handle, and half cylinder, left and right side panels, rear panel, rain roof, and plinth with screwed gland plates and screwed trim panels at the front and rear. The gland plates have dimensions of 340x150 mm.
Technology Explained Simply
The double-walled construction ensures thermal separation between the interior and the outside environment, stabilizing the internal temperature and improving heat dissipation. The double-walled flat parts are earthed, ensuring a secure earthing system for electrical installations. The 25 mm system spacing in the TS 8 frame allows flexible mounting of enclosure components, such as 48,3 cm ( 19 inch ) profile rails or system chassis. The lock BJ20027 with half cylinder provides secure access protection. The surface coating of UV-resistant pure polyester protects the enclosure from sunlight and weather influences, ensuring a long service life.
Compatibility and Accessories
The enclosure is designed as a base for project solutions in outdoor environments and can be expanded with various accessories. These include thermostats for internal temperature control, hygrostats for humidity control, mounting brackets for 48,3 cm ( 19 inch ) profile rails, system chassis for the outer level, enclosure heaters with fans, plastic and metal gland plates, and wall-mounted cooling units. Compatibility with these accessories allows individual adaptation to specific requirements. Alternatively, the CS Toptec model can be ordered in a baying version (order number 9774.005) or for single installations (order number 9774.099).
Mounting and Installation
The enclosure is delivered fully pre-assembled, reducing installation time. The pre-fabricated mounting planes in the TS 8 frame enable quick and secure installation of internal components. The screwed gland plates on the plinth facilitate fastening to the base. The pre-assembled door with swing handle and half cylinder is ready for immediate use. The double-walled construction requires no additional insulation measures, as thermal separation is already integrated.
Operational Advantages
The enclosure offers a high protection standard against weather influences, dust, and mechanical loads, ensuring reliable operation in demanding environments. The pre-assembled version reduces installation time and minimizes error sources. The integrated earthing of the flat parts ensures a secure electrical connection. The UV-resistant coating in RAL 7035 ensures long-term durability of the surface. Compatibility with various accessories allows flexible adaptation to different outdoor requirements.