| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Front panel, partition, including mounting hardware |
| Height | 100 mm |
| Suitable for | Width: = 600 mm |
| PCF/VE (Cradle-to-Gate) | 7.2 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV front trim panel for VX, bottom, type 9682336, is a modular front accessory for enclosures of the VX series. It serves as a lower closure for front design, particularly when using partial doors. The front trim panel is made of
steel sheet with a thickness of 1.5 mm and features a
structured paint surface in the color
RAL 7035, ensuring a robust and uniform surface finish. Dimensions are a height of 100 mm and a width of 600 mm, specifically designed for enclosures with a width of 600 mm.
Applications
The front trim panel is used in industrial environments where structured and clean front design of enclosures is required. It is particularly suitable for installations using partial doors to allow access to specific areas while keeping the lower section covered. The front trim panel ensures an optically uniform and closed front, offering high mechanical stability even with frequent operational access.
Functions and Equipment in Detail
The front trim panel can be removed from the outside by loosening the screws, enabling easy maintenance and replaceability. The delivery includes the front trim panel itself, a partition strip, and the required mounting hardware. Installation is done via screw connection, with the provided mounting elements ensuring secure fixation. The front trim panel is designed for
IP 54 protection rating, meaning it is protected against dust and splashing water, making it suitable for use in slightly damp or dusty environments.
Technology Explained Simply
The use of steel sheet with a thickness of 1.5 mm ensures high mechanical strength and durability. The structured paint finish gives the surface a rougher texture, which better conceals scratches and dirt, while also providing improved resistance to mechanical stress. The color RAL 7035 is a gray, neutral tone that integrates well in industrial environments. The IP 54 protection rating means the front trim panel is protected against dust and splashing water, making it suitable for use in production halls, workshops, or other industrial settings.
Compatibility and Accessories
The front trim panel is specifically designed for enclosures of the VX series with a width of 600 mm. It is intended as a lower closure for modular front designs, especially when partial doors are used. Compatibility with other front elements of the VX series is ensured, as mounting elements and dimensions are standardized.
Installation and Mounting
Installation is done by securing the front trim panel to the enclosure front using the screws and mounting elements included in the delivery. The front trim panel is attached to the lower edge of the front panel, with the partition strip securing the connection between the front trim panel and the enclosure body. Removal is also done from the outside by loosening the screws, enabling maintenance without disassembling the entire enclosure.
Operational Advantages
The front trim panel provides a clean and professional appearance for enclosures equipped with partial doors. The simple mounting and removal facilitates maintenance and repair work. The IP 54 protection rating ensures sufficient protection against environmental influences, increasing the service life of the front trim panel and the overall reliability of the enclosure system. The use of steel sheet and structured paint ensures high mechanical and chemical resistance, securing its suitability for industrial applications.