| General |
| Material | Sheet steel, 2 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Partition door, partition web, hinges, locking parts, including fastening material |
| Note | Maximum opening angle of partition doors 130° |
| Lock | Number of locks: 3 |
| Height | 1.400 mm |
| Suitable for | Width: = 800 mm |
| Degree of protection IP according to IEC 60 529 | IP 54 |
| PCF/VE (Cradle-to-Gate) | 94 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9682194 is a
partial door for VX enclosures, designed as a replacement for a complete door or a rear panel. With dimensions of 800 mm width and 1,400 mm height, it is specifically intended for enclosures with a width of 800 mm. The door is made of
sheet steel with a thickness of 2 mm and features a
structured paint surface in the color
RAL 7035, ensuring a robust and uniform coating suitable for industrial environments. The
protection rating IP 54 according to IEC 60 529 protects against dust and splashing water, making the door suitable for use in indoor areas with increased contamination risk or occasional moisture.
Applications
The partial door is used in industrial enclosures where a full door is not required, for example, when dividing an enclosure space into multiple sections. It can be combined freely with other partial doors to create individual compartments. A front trim panel is required at the top and bottom of the door to ensure a clean appearance. The door is intended for installation in VX enclosures and can be mounted in place of a rear panel or a complete door.
Functions and Equipment in Detail
The SV 9682194 features a
double-bar lock insert, supplied as standard and interchangeable with lock inserts of type A. The door is equipped with
three locks, ensuring secure latching. The
opening angle of the partial doors is up to 130°, which is sufficient to allow access to components behind the door without requiring excessive opening. The hinges can be mounted on the right or left side, enabling flexible installation at various positions within the enclosure.
Technology Explained Simply
The sheet steel material with a thickness of 2 mm provides sufficient mechanical stability to protect the door against mechanical stress. The structured paint surface in RAL 7035 is resistant to contamination and mechanical wear. The IP 54 protection rating means the door is dust-tight and protected against splashing water, making it suitable for use in production environments or rooms with occasional moisture. The locking components are designed to enable secure latching, with the interchangeability of lock inserts allowing adaptation to specific safety requirements.
Compatibility and Accessories
The partial door is specifically designed for VX enclosures with a width of 800 mm. As accessories, various front trim panels are available, which must be mounted at the top and bottom of the door. These include front trim panels in dimensions 800x300 mm and 800x100 mm, each available in protection ratings IP 54 and IP 2X. Additionally, lock inserts made of zinc die-cast with a length of 27 mm are available as replacements for the standard double-bar lock insert. Mini comfort handles for AX and KX enclosure door locks are also available as compatible accessories.
Installation and Mounting
The installation of the partial door is carried out using the hinges, partition strip, locking components, and fastening materials included in the delivery scope. The door can be hinged on the right or left side, allowing flexible arrangement within the enclosure. The maximum opening angle of 130° ensures sufficient space for access to components behind the door.
Operational Advantages
The partial door enables flexible and modular division of enclosures, improving accessibility to specific components without having to open the entire enclosure. The IP 54 protection rating provides sufficient protection against dust and splashing water, increasing reliability in industrial environments. The interchangeability of lock inserts allows adaptation to specific safety requirements. The robust construction from 2 mm sheet steel ensures a long service life under industrial conditions.
The delivery scope includes the partial door, partition strip, hinges, locking components, and the required fastening materials. The door is intended for VX enclosures with a width of 800 mm and can be combined with various front trim panels and lock inserts to meet individual requirements.