| General |
| Material | Sheet steel, 1 mm |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Length | 598 mm |
| Suitable for | Width: 800 mm |
| OUT_SUITABLE_FOR_PARTIAL_DOOR_HEIGHTS | 150 ‐ 800 mm |
| PCF/VE (Cradle-to-Gate) | 6.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9681208 is a punched mounting rail made of steel sheet with a thickness of 1 mm, specifically developed for retrofitted installation on partial doors in enclosures. The product serves as a mounting element for individual add-on components on the rear side of the door, such as cable ducts or hose holders. The mounting rail has a length of 598 mm and is designed for partial doors with a width of 800 mm. The available heights for the partial doors range from 150 mm to 800 mm, allowing flexible use in various enclosure configurations.
Punched mounting rail
The punched mounting rail features a uniform hole pattern with a spacing of 25 mm, enabling precise and flexible positioning of mounting elements. The holes have a diameter of 4.5 mm, suitable for use with standard screws and fastening materials. The surface of the mounting rail is zinc-coated, ensuring high corrosion resistance and long service life in industrial environments.
Applications
The mounting rail is primarily intended for use in enclosures and distribution boxes where additional mounting options are required on the inner side of the partial door. It is particularly suitable for applications where cable ducts, hose holders, or other accessories need to be mounted on the door to organize cable routing and facilitate access to components. The installation is retrofitted without requiring any modification to the door itself.
Functions and equipment in detail
The SV 9681208 is supplied with fastening material, enabling installation without additional purchases. The mounting rail is made of steel sheet, providing sufficient strength for securing light to medium-weight components. The zinc coating of the surface protects against moisture and oxidation, which is especially beneficial in damp or industrial environments.
Technology explained simply
The 25 mm hole pattern allows flexible arrangement of mounting points, enabling the positioning of cable ducts or other elements to be adapted to the specific application. The hole size of 4.5 mm is suitable for common screws and fasteners used in electrical and automation technology. The length of 598 mm corresponds to the standard depth of many enclosure doors, allowing optimal utilization of the mounting rail.
Compatibility and accessories
The mounting rail is specifically designed for partial doors with a width of 800 mm and can be used in combination with other Rittal products such as cable ducts, hose holders, or other mounting elements. Compatibility with various accessories is ensured by the standardized hole pattern and material quality. The use is independent of the exact door height within the range of 150 mm to 800 mm.
Installation and mounting
The mounting is carried out on the inner side of the partial door, where the mounting rail is attached to the door using the included fastening material. The installation requires no special tools, except a screwdriver or screw gun. The mounting rail is typically installed horizontally to ensure even distribution of mounting points.
Operational advantages
The use of the punched mounting rail enables structured and clear cable routing on the door, facilitating maintenance and inspection of enclosures. The retrofitted installation without modifying the door itself reduces installation effort and offers flexibility in adapting to different requirements. The zinc-coated surface ensures long service life and low maintenance requirements.
Product type, core function, technology, standards
The product type is a punched mounting rail, fulfilling the core function of securing additional components to the rear side of partial doors. The technology is based on a standardized hole pattern of 25 mm and a zinc-coated steel sheet construction. The standards refer to material quality and mechanical properties required for use in industrial enclosures. The packaging unit is 10 pcs, with the net and gross weight (1.9 kg and 1.914 kg respectively) being relevant for logistics and storage purposes. The PCF values (Cradle-to-Gate) amount to 6.9 kg CO2 eq per packaging unit, with category B marked as approximately calculated and self-declared.