| General |
| Material | Sheet steel, 1 mm |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Length | 398 mm |
| Mounting note | For cabinet width 1000 mm: 1 x 9681.204 and 1 x 9681.206, For cabinet width 1200 mm: 2 x 9681.206 |
| Suitable for | Width: 600 mm |
| OUT_SUITABLE_FOR_PARTIAL_DOOR_HEIGHTS | 150 ‐ 800 mm |
| PCF/VE (Cradle-to-Gate) | 4.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV punched mounting rail, manufacturer's number 9681206, is an accessory for retrofitted installation on partial doors of enclosures. It serves as a mounting base for individual add-ons on the rear side of the door, such as cable ducts, hose holders, or other mounting elements. The mounting rail is made of
steel sheet with a thickness of 1 mm and features a
zinc-coated surface, providing corrosion-resistant protection. With a length of 398 mm and a
25 mm hole pitch, it offers flexible mounting options for various components. The holes have a diameter of 4.5 mm, enabling secure and precise installation.
Applications
The mounting rail is specifically designed for partial doors with a width of 600 mm and can be used for door heights between 150 mm and 800 mm. It is particularly suitable for use in industrial environments where flexible and retrofitted mounting of additional components on the door rear is required. The installation is on the outer side of the partial door, making it suitable for connecting cable ducts, hose lines, or other mounting elements.
Functions and Equipment in Detail
The mounting rail features a regular 25 mm spacing between holes, enabling versatile and precise positioning of mounting elements. The holes with a 4.5 mm diameter are designed for standard screws or mounting hardware. The delivery includes the mounting material required for installation on the partial door. The mounting rail is designed for use on enclosure doors with a width of 600 mm.
Technology Explained Simply
The mounting rail consists of a flat steel sheet profile, which provides a structured mounting surface through the hole pattern. The zinc coating protects the material from corrosion, especially in damp or industrial environments. The 1 mm thick steel sheet construction provides sufficient strength for mounting light to medium-weight components. The holes are evenly spaced to allow flexible positioning during installation.
Compatibility and Accessories
The mounting rail is intended for partial doors with a width of 600 mm and can be used in combination with other mounting rails from the manufacturer. For enclosure widths of 1000 mm, it is recommended to use a combination of article number 9681.204 and 9681.206. For an enclosure width of 1200 mm, two units of article number 9681.206 are required. The mounting rail is thus part of a modular system for mounting additional components on enclosure doors.
Installation and Mounting
The installation is carried out on the outer side of the partial door using the included mounting material. The holes spaced at 25 mm intervals allow flexible positioning of mounting elements. The mounting rail is attached to the door, with the exact arrangement varying depending on the desired mounting position and requirements of the enclosure. The installation is simple and requires no special tools beyond the standard mounting material.
Operational Advantages
The mounting rail provides a flexible and retrofitted option to mount additional components on the rear side of the partial door without modifying the door itself. The zinc-coated surface ensures long service life, even in damp or corrosive environments. The 25 mm hole density enables precise and versatile mounting, facilitating adaptation to different operational requirements. The use of standard mounting hardware ensures easy handling and maintenance.