| General |
| Material | Sheet steel, 1 mm |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Length | 198 mm |
| Mounting note | For cabinet width 1000 mm: 1 x 9681.204 and 1 x 9681.206 |
| Suitable for | width: 400 mm |
| OUT_SUITABLE_FOR_PARTIAL_DOOR_HEIGHTS | 200 ‐ 800 mm |
| PCF/VE (Cradle-to-Gate) | 2.4 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV punched mounting rail, manufacturer's number 9681204, is an accessory for retrofitted mounting on partial doors of enclosures. It serves as a mounting base for individual add-ons on the rear side of the door, such as cable ducts, hose holders, or other mounting elements. The mounting rail is made of
steel sheet with a thickness of 1 mm and features a
zinc-coated surface providing corrosion protection. The length is 198 mm, with a hole pattern spaced at 25 mm intervals. The holes have a diameter of 4.5 mm, enabling secure fastening of components. The mounting rail is specifically designed for partial doors with a width of 400 mm and can be used for door heights between 200 mm and 800 mm.
Applications
The mounting rail is designed for use in industrial enclosures where flexible and retrofitted fastening of accessories to the rear of the door is required. It is particularly suitable for applications where cables or lines need to be attached to the door to ensure proper cabling and improved accessibility. Use on partial doors allows modular expansion of enclosure functions without the need for complete door replacement.
Functions and Equipment in Detail
The mounting rail features a uniform 25 mm hole pattern, enabling precise and repeatable mounting of various components. The holes with a 4.5 mm diameter are suitable for standard fastening elements. The steel sheet material with 1 mm thickness ensures sufficient strength for typical mounting requirements in enclosures. The zinc-coated surface protects the material from corrosion and ensures longer service life, especially in environments with increased humidity or low aggressiveness.
Technology Explained Simply
The mounting rail is attached to the rear of the partial door, where the holes serve as connection points for screws or other fastening elements. The 25 mm grid allows flexible positioning of mounted components. The use of steel sheet with a thickness of 1 mm ensures sufficient load-bearing capacity, while the zinc-coated surface forms a passive corrosion protection layer. The mounting rail is not designed for dynamic or load-critical applications, but for static fastenings within enclosures.
Compatibility and Accessories
The mounting rail is specifically designed for partial doors with a width of 400 mm. For enclosures with a width of 1000 mm, it is recommended to use a combination of mounting rail 9681.204 and mounting rail 9681.206 to cover the entire door width. The mounting rail is suitable for door heights between 200 mm and 800 mm. Mounting is done using the included
fastening material, which is intended for attachment to the rear of the door.
Mounting and Installation
Mounting is performed on the rear of the partial door, where the mounting rail is attached to the door using the included fastening material. The holes in the 25 mm grid allow flexible positioning of mounted components. Installation is simple and requires no special tools, except a screwdriver or suitable screwdriver. The mounting rail is designed for retrofitted installation, meaning it can also be installed on already mounted doors.
Operational Advantages
The mounting rail enables flexible and modular expansion of enclosure functions. Retrofitted mounting on existing partial doors reduces modification effort and allows adaptation to changing requirements. The use of steel sheet with a zinc-coated surface ensures high robustness and durability. The uniform hole arrangement simplifies planning and execution of mounting work, reducing working time and minimizing error rates.