Rittal 9680227, EAN: 4028177937055

Rittal 9680227 control panel cabinet 1200x2200x800 mm

Rittal 9680227 control panel cabinet 1200x2200x800 mm

Lieske Part No. 1129299
Mfg Part No 9680227
EAN-Code 4028177937055
Manufacturer Rittal
Here only 2.298,51 EUR
2.735,23 EUR incl. VAT

Further information for Rittal 9680227 control panel cabinet 1200x2200x800 mm

General
MaterialSheet steel, 1.5 mm
Surface protectionCabinet frame: dip primed, door, roof and rear panel: dip primed, externally powder coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliverycabinet frame, door, roof sheet, rear panel, floor sheets, front panels, lock: 3 mm double bar, functional space side walls, mounting frame for switchgear strips with fuses (manufacturer ABB SlimLine/Jean Müller SASIL)
Degree of protection IP according to EN 60 529up to IP 2X (depending on paneling)
Test basisIEC 61 439-1/-2, IEC 61 641
Width1.200 mm
Height2.200 mm
Depth800 mm
PCF/VE (Cradle-to-Gate)391.5 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX switchgear enclosure, manufacturer's number 9680227, is a bayed enclosure system for the distribution of electrical power with fuse switch disconnectors. It is specifically designed for use in industrial and commercial installations where safe and structured installation of switchgear is required. The unit is manufactured from steel sheet with a thickness of 1.5 mm and offers a robust construction for use in operating environments with high mechanical and thermal loads.

Applications
This switchgear enclosure is intended for use in distribution systems, particularly in installations equipped with fuse switch disconnectors from the manufacturers ABB SlimLine or Jean Müller SASIL. It is suitable for applications in industrial electrical engineering, such as in production plants, power distribution systems, or in buildings with complex power supply requirements. The dimensions of 1,200 mm width, 2,200 mm height, and 800 mm depth allow for flexible integration into existing enclosure systems or as a standalone unit.

Functions and Equipment in Detail
The enclosure features a complete frame structure consisting of the enclosure frame, door, roof plate, rear panel, base sheets, and front trim panels. The surface of the enclosure frame is dip-primed, while the door, roof, and rear panel are externally powder-coated and feature a textured finish. The base sheets are galvanized, providing enhanced corrosion resistance. The enclosure color is RAL 7035, a gray tone that integrates well in industrial environments. The locking mechanism uses a 3 mm double latch, ensuring secure and stable latching. Additionally, functional compartment side panels and a mounting frame for switchgear with fuses are included, specifically designed for the mentioned manufacturers.

Technology Explained Simply
The construction from 1.5 mm steel sheet ensures high mechanical stability and resistance to external influences. The dip-primed and powder-coated surface provides good protection against corrosion and contamination. The protection rating IP up to IP 2X (depending on paneling) means the enclosure is protected against contact with fingers and against solid foreign objects up to 12.5 mm. This is sufficient for use in indoor environments where no direct exposure to water or dust is expected. The test basis IEC 61 439-1/-2 and IEC 61 641 ensures compliance with international standards for low-voltage switchgear and fuse switch disconnectors.

Compatibility and Accessories
The enclosure is specifically designed for mounting fuse switch disconnectors from the manufacturers ABB SlimLine and Jean Müller SASIL. The integrated mounting frame enables secure and precise installation of these components. The functional compartment side panels support structured compartmentalization of the interior space and facilitate installation and maintenance of electrical components. The use of front trim panels and the double latch locking system ensures proper compartmentalization and access control.

Mounting and Installation
Assembly is performed by securing individual components to the enclosure frame. The base sheets and side panels enable stable positioning. The door is secured with the double latch locking system, ensuring reliable closure. The pre-fabricated construction reduces assembly time and allows for quick commissioning. The dimensions are chosen to enable integration into standard bayed systems of the VX25 series.

Operational Advantages
The switchgear enclosure provides a reliable and maintenance-friendly solution for power distribution. The integrated construction with pre-assembled elements reduces installation effort. The use of high-quality materials such as galvanized steel sheet and powder-coated surfaces ensures long service life. The protection rating IP 2X is sufficient for use in enclosed rooms where no special environmental conditions such as humidity or dust prevail. Compliance with standards IEC 61 439-1/-2 and IEC 61 641 ensures safety and reliability in operation.

Scope of Delivery
The enclosure is delivered with the following components: enclosure frame, door, roof plate, rear panel, base sheets, front trim panels, locking mechanism (3 mm double latch), functional compartment side panels, and mounting frame for switchgear with fuses (manufacturers ABB SlimLine/Jean Müller SASIL).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1129299
qrcode für Rittal 9680227 control panel cabinet 1200x2200x800 mm